Konica Minolta Dimage X20 instruction manual Yes No

Connect the camera to the printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Slide open the USB-port cover and insert the smaller plug of the cable into the camera. Turn the camera on. The USB Direct Print screen will be displayed.

Number of prints in the print run.

Strike through indicates unprintable file type.

Number of copies of the displayed image.

Use the left/right keys of the controller to display the image to be printed.

Press the up key to select the number of copies to be printed. A maximum of nine copies can be selected. To deselect an image for printing, press the down key until the number of copies reaches zero.

:move	:sel.	:print
The button switches between the single			Repeat the previous steps until all the
frame and index playback formats.			images to be printed are selected. Press
			the central button of the controller to
			begin the printing routine.

Print file?

Number of prints: 7

Yes No

Printing finished.

OK

The number of prints in the print run is displayed on the LCD monitor. Use the left/right keys to highlight “Yes,” and press the center of the controller to start printing.

Once printing begins, the operation can be canceled by pressing the center of the controller. The printing finished message will indicate the end of the operation; turn the camera off to end the routine.

101