Konica Minolta Dimage X20 instruction manual Connecting the Camera to a Computer

Page 90

CONNECTING THE CAMERA TO A COMPUTER

Confirm the battery has sufficient power before connecting the camera to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98 or 98SE, read the section on page 93 on how to install the necessary USB driver before connecting the camera to a computer.

1.Start up the computer. The computer must be turned on before connecting the camera.

2. Insert the memory card into the camera. To change the memory card while the camera is connected to a computer, see page 100.

3. Slide the AV-out terminal / USB-port cover open. Insert the small plug of the USB cable into the camera. Make sure the plug is firm- ly attached.

4.Attach the other end of the USB cable to the computer’s USB port. Make sure the plug is firmly attached. The camera should be connected directly to the computer’s USB port. Attaching the cam-

era to a USB hub may prevent the camera from operating proper- ly.

5 Turn on the camera to initiate the USB connection. While the cam- era is connected to a computer, the data-transfer screen

will be displayed.

90DATA-TRANSFER MODE

Image 90

Contents 9222-2787-11 P-A306 ME-0306 Before YOU Begin For Proper and Safe USE For Proper and Safe USE Page For Proper and Safe USE Page Table of Contents Main menu navigation movie mode Playback advanced operation 100 Names of Parts LCD monitor Speaker Inserting the Battery Getting UP and RunningBATTERY-CONDITION Indicator Auto Power OFFStrap a Strap B Using strap a AC Adapter Sold SeparatelyAttaching the Strap Using strap a Installing and Removing a Memory Card Write- protect switch About Memory CardsLock position Setting the Date and Time Getting UP and RunningDate/Time setting screen MentsSetting the Camera to Record Images Handling the CameraUsing the Zoom Lens Shooting tipsLCD Monitor Display Basic CAMERA-SHAKE WarningBasic Recording Operation Focus Lock Focus RangeFocus Signals Special Focusing SituationsFocus signal Flash Signals Flash mode indicatorFlash Range Automatic Operation LCD Monitor Display Recording Mode Mode indicator SINGLE-FRAME Playback DisplayViewing Images Deleting Single ImagesLCD Monitor Display Playback Mode Enlarged Playback Focus signal p LCD Monitor Display AdvancedMain Menu Navigation RECORDING-MODE Use the controller to highlight the desired menu options Flash Modes Page Drive Modes Self-timer Continuous advance Multi frame Self-portraitWhite Balance Image Size and Image Quality 1280Frame Counter and Memory Card Capacity Exposure Compensation Calculated camera 0Ev ExposureToning Portrait Navigating the RECORDING-MODE Menu Setup Customizing KEY Functions 10m ~ 2.5m 3ft. ~8.2 ft ~ 1.9m 3ft. ~6.2ft Camera Sensitivity ISOFlash Range and Camera Sensitivity 10m ~ 3.6m 3ft. ~11.8 ft ~ 2.7m 3ft. ~8.8ftAuto Reset Microphone Indicator lamp Voice MemoRemaining recording time Date-imprinting indicator Date ImprintingDigital Zoom MagnificationInstant Playback File Number # Memory Folder NameRecording Without a Memory Card Minolta historyMicrophone Indicator lamp Recording time Recording indicator Image sizeMain Menu Navigation MOVIE-MODE 320 X Playback Advanced Operation Playing Back Voice Memos and Audio CaptionsPlaying Back Movies Movie fileMain Menu Navigation PLAYBACK-MODE Navigating the PLAYBACK-MODE Menu Frame-selection Menu Options in the Playback ModeType Size Location Frame For information on Screens, see Return to the menuLCD brightness Format Reset default Language English FRAME-SELECTION Screen Deleting Image and Audio Files This Frame All Frames Marked framesLocking Image and Audio Files Audio Caption Copy to Favorite This frame Marked framesViewing Favorites Copies Favorite folder name File number in the Favorite folderRotate Image PastingSelecting the image paste icon on the main menu Slide Show Page About Dpof Creating a Dpof Print OrderOrdering AN Index Print Mail Copy Viewing Images on a Television Setup Menu Navigating the Setup MenuYYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Ntsc PAL LCD Monitor Brightness Formatting Memory CardsReset Default Audio Signals Language Volume Shutter FXDate Format Transfer ModeDate and Time Video OutputDATA-TRANSFER Mode System RequirementsConnecting the Camera to a Computer Page Connecting to Windows 98 and 98SE Automatic InstallationManual installation DATA-TRANSFER Mode Auto Power OFF DATA-TRANSFER Mode Quicktime System RequirementsMemory Card Folder Organization FavoriteCamera Notes Disconnecting the Camera from a Computer Windows 98 / 98 Second EditionWindows Me, 2000 Professional, and XP Macintosh Changing the Memory Card DATA-TRANSFER Mode Using USB DIRECT-PRINTWindows 98 and 98 Second Edition Yes No Navigating the USB DIRECT-PRINT Menu Printing Dpof Files Yes NoInstalling the Remote Camera Driver Remote Camera System RequirementsPage Connecting the Remote Camera Section for detailsPage Troubleshooting AppendixProblem Symptom Cause Solution Removing the Driver Software Windows Camera care CleaningCare and Storage StorageMemory cards BatteriesBefore important events and journeys LCD monitor care Operating temperatures and conditionsQuestions and service CopyrightType interline primary-color CCD with a total Technical SpecificationsNumber of effective pixels Million Million pixels