Kodak ZI10 Care and maintenance, When removing batteries, allow them to cool they may be hot

Appendix

■If using this product in an airplane, observe all instructions of the airline.

■When removing batteries, allow them to cool; they may be hot.

■Follow all warnings and instructions supplied by the battery manufacturer.

■Use only batteries approved for this product to avoid risk of explosion.

■Keep batteries out of the reach of children.

■Do not allow batteries to touch metal objects, including coins. Otherwise, a battery may short circuit, discharge energy, become hot, or leak.

■Do not disassemble, install backward, or expose batteries to liquid, moisture, fire, or extreme temperature.

■Remove the batteries when the product is stored. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support.

■In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider. For additional health-related information, contact your local Kodak customer support.

■Go to www.kodak.com/go/reach for information about the presence of substances included on the candidate list according to article 59(1) of Regulation (EC) No. 1907/2006 (REACH).

■Dispose of batteries according to local and national regulations. Go to www.kodak.com/go/kes.

■For more information, go to www.kodak.com/go/batteries.

Care and maintenance

■Before inserting or removing the card/battery, make sure your hands, the camera, and the card/battery are completely dry.

■If water has entered the camera, remove the battery/card. Allow all components to air-dry for at least 24 hours before using the camera.