Setting the unit to match your Speaker system

BASIC SYSTEM SETTINGS

Setting the unit to match your

speaker system

Follow the instructions below to set the amplifier output to match the size of your room and speakers. Press u / d to cycle through parameters 1 through 4, and –/+ to alter the parameter setting.

Factory default settings are highlighted.

1ROOM

Settings: S, M, L

Select the size of the room you have installed your speakers in. Roughly speaking, the room sizes are defined as follows:

[U.S.A. and Canada models]

S:16ft. x 3ft., 200sq.ft. (4.8 x 4m, 20m2)

M:20ft. x 16ft., 300sq.ft. (6.3 x 5.0m, 30m2)

L:26ft. x 19ft., 450sq.ft. (7.9 x 5.8m, 45m2)

[Other models]

S:3.6m x 2.8m, 10m2

M:4.8m x 4.0m, 20m2

L:6.3m x 5.0m, 30m2

2SUBWOOFER

Settings: YES, NONE

Select YES if you have a subwoofer in your system, or NONE if you do not.

3SPEAKERS

Settings: 2, 3, 4, 5 (spk)

Select the number of speakers you wish to use in your speaker configuration. This number does not include your subwoofer.

Setting	Display		Speaker
2spk	L	R	Main L/Main R
3spk	L C R		Main L/Center/Main R
4spk	L	R	Main L/Main R/Rear L/
	RL	RR	Rear R
5spk	L C R		Main L/Center/Main R/
	RL	RR	Rear L/Rear R
	RL	RR

4SET or CANCEL

Select SET to confirm the changes you made to the above three settings. The unit will output a test tone to the speakers (see 5). Alternatively, select CANCEL to exit this menu without altering any of the unit settings.

5Use the test tone to check the speaker levels.

When you select SET in 4, the display changes to “CHECK: TestTone”, and the unit outputs a test tone to each of the speakers in turn. When the test tone begins, the display changes to “CHECK OK?-- YES”.

If the volume of the test tone varies between speakers, press –/+ to change the display to “NO”. The unit will automatically enter the “2 SP LEVEL” mode.

If the test tone is output at the same volume from all of the speakers, select “CHECK OK: YES”. Press d to exit from the SETUP menu.

Notes

•The unit cycles the test tone around each of the speakers in turn twice.

•The indicator of the speaker currently outputting the test tone flashes on the front panel display.

Setting speaker output levels

(SP LEVEL)

Use this menu to compare and adjust the test tone output from each speaker to the output from the left main (or left rear) speaker so that the volume level for all speakers is identical. Press u/ d to select a speaker, then adjust the balance using –/+.

Note

•The unit outputs the test tone from the selected speaker and the left main (or left rear) speaker in turn. The indicator of the speaker currently outputting the test tone flashes on the front panel display.

1L-R

Adjusts the balance between the main left and right speakers.

Adjusts the balance between the main left and center speakers.

3RL

Adjusts the balance between the main left and rear left speakers.

4RR

Adjusts the balance between the rear left and rear right speakers.

5SWFR

Adjust the balance between the main left speaker and the subwoofer.

HTR-5630RDS specifications

The Yamaha HTR-5630RDS is a versatile and robust home theater receiver that delivers an exceptional audio experience for movie buffs and music lovers alike. Launched as part of Yamaha's renowned line of audio equipment, this model integrates advanced technologies tailored to enhance both sound quality and usability.

One of the standout features of the HTR-5630RDS is its compatibility with a wide variety of audio formats. It supports Dolby Digital and DTS decoding, which means it can process multi-channel audio signals that create an immersive surround sound experience. Whether you’re watching an action-packed blockbuster or a serene classical concert, this receiver ensures that every sound fills the room and envelops you.

In addition to its decoding capabilities, the HTR-5630RDS boasts a power output of 100 watts per channel, providing ample power for driving a full surround sound speaker system. Its high-current design ensures that it can deliver exceptional performance even with demanding speakers, offering a clear and dynamic soundstage. Moreover, the receiver features multiple audio inputs, including optical and coaxial digital connections as well as analog inputs, allowing you to connect various devices like gaming consoles, Blu-ray players, and streaming devices with ease.

The HTR-5630RDS also comes equipped with Yamaha's proprietary YPAO (Yamaha Parametricroom Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts settings to optimize sound performance based on your specific environment. This means that regardless of where you place your speakers, you can expect balanced and accurate sound reproduction.

For those who enjoy listening to the radio, the HTR-5630RDS includes an RDS (Radio Data System) tuner that provides information about FM radio stations, such as song titles, artist names, and other details. The user-friendly interface makes it easy to navigate through stations and select your favorites, enhancing your listening experience.

With its sleek design and comprehensive feature set, the Yamaha HTR-5630RDS stands out as an excellent choice for anyone looking to build a high-quality home theater system. Its combination of powerful amplification, advanced processing features, and user-friendly setup makes it an ideal addition to any entertainment setup. Whether you're enjoying a movie night with family or hosting a gathering with friends, the Yamaha HTR-5630RDS ensures that your audio experience will be nothing short of extraordinary.