Yamaha HTR-5630RDS Speaker mode settings, 1A Center center speaker mode, Lrg, Sml, Non

Page 42

SET MENU

5 Press –/+ once to enter the setup mode of the selected item.

The last setting you adjusted appears on the front panel display.

Depending on the menu item, press u/d to select a sub item.

6 Press –/+ repeatedly to change the menu item setting.

7 Press u/d repeatedly until the menu disappears.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If this happens, adjust the items again.

The BASIC and SOUND menus

The “BASIC” menu allows you to easily set the “SOUND 1 SPEAKER SET” and “SOUND 2 SP DISTANCE” parameters. It is not necessary to reset any of the parameters in the “BASIC” menu, but you can access more detailed parameters in the “SOUND” menu if you wish.

Note

•After altering parameters in the “SOUND” menu, if you select “BASIC 1 SETUP” and then select “SET”, the parameters from the “SOUND” menu alter in response to any changes you make in “BASIC 1 SETUP”. Do not enter the “BASIC 1 SETUP” menu unless you wish to change these settings. If you accidentally enter the “BASIC 1 SETUP” menu, select CANCEL to return to the “BASIC” menu. (page 19)

SOUND 1 SPEAKER SET

(speaker mode settings)

Use this feature to select suitable output modes for your speaker configuration.

Note

•Some menu item settings have no effect when the unit is reproducing a source with a digital signal sampling frequency greater than 48 kHz.

■1A CENTER (center speaker mode)

If you add a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The unit directs the entire range of the center channel signal to the center speaker.

SML

Select this if you have a small center speaker. The unit directs the low-frequency signals (90 Hz and below) of the center channel to the speakers selected with “1D BASS”.

NON

Select this if you do not have a center speaker. The unit directs all of the center channel signal to the main left and right speakers.

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents HTR-5630RDS For U.K. customers Special Instructions for U.K. ModelContents About this manual FeaturesOther features Sophisticated AM/FM TunerSupplied accessories Getting StartedControl Controls and Functions Front panelNext SET Menu -/+Remote control MuteProgram -/+ Using the remote control Handling the remote controlFront panel display Connecting to digital jacks ConnectionsConnecting video components Connecting audio components Connecting a CD playerConnecting a CD recorder or MD Recorder Connecting the antennas Connecting the AM loop antennaFrequency Step switch General model only Connecting an external decoder Connecting the speakers Speaker placementSpeakers Connecting to the Main a Speakers terminals ConnectionsCenter Speaker terminals Main Speakers terminalsRear Speakers terminals Subwoofer jackConnecting the AC power cord Connecting the power supply CordsTurning on the power General model onlySetup Basic System SettingsUsing the basic menu SP LevelSET YESSetting the unit to match your Speaker system Setting speaker output levelsPlayback ON/OFF inward onTo select the audio source connected to the 6CH Input jacks BGV background video function Night listening modeWhen you have finished using this unit To mute the soundInput modes and indications DVDAdventure Selecting PRO Logic or PRO Logic Playing Dolby Digital EX or DTS ES MaterialVirtual Cinema DSP Normal stereo reproductionHi-Fi DSP programs Digital Sound Field Processing DSPUnderstanding sound fields Recreating a sound fieldCINEMA-DSP Programs CINEMA-DSPSound design of CINEMA-DSP For audio-video sources No toFor movie programs Straight DecodeDolby Digital/DTS + Matrix 6.1 + DSP sound field effect Sound field effectsDolby Digital/DTS + DSP sound field effect Dolby Pro Logic + DSP sound field effectTuning Automatic tuningManual tuning Presetting stations Automatically presetting stations for FM StationsManually presetting stations Tune in to a stationRepeat steps 1 to 5 to store other stations Selecting a preset station Exchanging preset stationsPress PRESET/TUNING Edit again Changing the RDS mode Receiving RDS StationsDescription of RDS data PTY Seek function To cancel this functionPress PTY Seek Mode to set the unit PTY Seek mode EON functionSetting the sleep timer Sleep TimerCanceling the sleep timer Press Sleep repeatedly until Sleep OFFSpecial considerations when recording DTS material RecordingAdjusting the items on the set Menu SET MenuSet menu list LRG Speaker mode settings1A Center center speaker mode SML1B Main main speaker mode 1C Rear LR rear speaker mode1D Bass bass out mode Speaker distance Setting by metersSetting by feet Dynamic rangeInput 1 I/O Assign input Output assignment Initial input modeSound 5 Center GEQ center Graphic equalizer Headphone tone controlMemory guard 50dB20dB Setting the Speaker Levels Adjusting the volume during PlaybackUsing the test tone Repeat steps 1 3 if you wish to alter other parameters Changing parameter settingsSound Field Program Parameter Editing Select a sound field programDigital sound field parameter descriptions For 5ch StereoCT Width Center width Troubleshooting Problem Cause Remedy Refer toGeneral No sound / weak Check SP Wires Remote control Problem Cause RemedyTuner Glossary PCM Linear PCM Sampling frequency and number Quantized bitsSpecifications WB14680 NS-P100/ NS-P106 Important Safety Instructions FCC Information for US customers only Unit4m10m For SW-P130 Voltage SelectorComponents of the Package Subwoofer Rear L Rear center Rear R For NS-P106 Rear center speaker for NS-P106 Placing the subwoofer Use the nonskid padsUsing the Yamaha Speaker Stand SPS-80 option Mounting bracket AAX34790 Screw AAX12390 NS-P100 NS-P106 Connections Before connecting How to ConnectVolume control Power switchAuto Standby HIGH/LOW/OFF switch Front panel Rear panel Automatic power-switching function  Frequency characteristics Advanced Yamaha Active Servo Technology for SW-P130 Though the Power switch is set Problem Cause What to Do No soundProblem Cause What to Do Power is not supplied even Standby mode automatically NX-E130, NX-C130  SW-P130WB32590 DVD-S540 Important Safety Instructions EL 6475-E002 01/3We Want You Listening For a Lifetime FCC Information for US customers onlyFor Customer Use Laser Safety Contents Introduction Symbols Used in this ManualSupplied accessories Environmental InformationFront and Rear Panels AC Power CordFunctional Overview Disc TrayPlay B Remote ControlStop PauseDigital Connections PreparationGeneral Notes on connections Analog ConnectionsComponent Video terminal B Video ConnectionsVideo terminal a Composite Video terminal 1, 2 CSmart Power On/Off Inserting batteries into the Remote ControlTurning on the power Using the Remote ControlGeneral Operation OperationBasic Playback Video control during playbackRepeat and Shuffle Repeat A-B DVD VCD CDOSD On-Screen Display Special DVD Features Special VCD & Svcd FeaturesDisc Interval Preview FunctionTrack Digest Track IntervalMP3 & Jpeg Navigator Play ModePicture CD & MP3 Playback Auto PlaybackSpecial Jpeg Features Special MP3 FeaturesJpeg and MP3 simultaneous playback Basic Operation Setup MenuGeneral Setup menu Disc LockOSD language Audio Setup menuSpeaker Setup Screen Saver3D Reverb Mode Digital Audio SetupEqualizer Sound Mode Digital OutputTV Type Video Setup menuSetup the item as follows TV DisplayPicture Setting Closed CaptionProgressive Password Setup Color saturationSubtitle language Preference Setup menuAudio language Disc Menu languageDefault Setup Parental Control DVDMP3/JPEG Navigator Troubleshooting Problem SolutionCleaning the Cabinet SpecificationsMaintenance Cleaning DiscsLanguage Code 7967
Related manuals
Manual 106 pages 37.46 Kb

HTR-5630RDS specifications

The Yamaha HTR-5630RDS is a versatile and robust home theater receiver that delivers an exceptional audio experience for movie buffs and music lovers alike. Launched as part of Yamaha's renowned line of audio equipment, this model integrates advanced technologies tailored to enhance both sound quality and usability.

One of the standout features of the HTR-5630RDS is its compatibility with a wide variety of audio formats. It supports Dolby Digital and DTS decoding, which means it can process multi-channel audio signals that create an immersive surround sound experience. Whether you’re watching an action-packed blockbuster or a serene classical concert, this receiver ensures that every sound fills the room and envelops you.

In addition to its decoding capabilities, the HTR-5630RDS boasts a power output of 100 watts per channel, providing ample power for driving a full surround sound speaker system. Its high-current design ensures that it can deliver exceptional performance even with demanding speakers, offering a clear and dynamic soundstage. Moreover, the receiver features multiple audio inputs, including optical and coaxial digital connections as well as analog inputs, allowing you to connect various devices like gaming consoles, Blu-ray players, and streaming devices with ease.

The HTR-5630RDS also comes equipped with Yamaha's proprietary YPAO (Yamaha Parametricroom Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts settings to optimize sound performance based on your specific environment. This means that regardless of where you place your speakers, you can expect balanced and accurate sound reproduction.

For those who enjoy listening to the radio, the HTR-5630RDS includes an RDS (Radio Data System) tuner that provides information about FM radio stations, such as song titles, artist names, and other details. The user-friendly interface makes it easy to navigate through stations and select your favorites, enhancing your listening experience.

With its sleek design and comprehensive feature set, the Yamaha HTR-5630RDS stands out as an excellent choice for anyone looking to build a high-quality home theater system. Its combination of powerful amplification, advanced processing features, and user-friendly setup makes it an ideal addition to any entertainment setup. Whether you're enjoying a movie night with family or hosting a gathering with friends, the Yamaha HTR-5630RDS ensures that your audio experience will be nothing short of extraordinary.
Top Page Image Contents