Yamaha HTR-5630RDS Sound 5 Center GEQ center Graphic equalizer, Headphone tone control

Page 45

SOUND 5 CENTER GEQ (center

graphic equalizer)

Use this feature to adjust the built-in 5-band graphic equalizer so that the center speaker tonal quality matches that of the left and right main speakers. You can select the 100 Hz, 300 Hz, 1 kHz, 3 kHz, or 10 kHz frequencies. Control range (dB): –6 to +6

Initial setting: 0 dB for 5-band

1 Press d to select a higher frequency and u to select a lower frequency.

2 Press –/+ to adjust the level of that frequency.

Note

•You can monitor the center speaker sound while adjusting this parameter by using the test tone. Press TEST before starting the foregoing procedure. Once you begin this procedure, the test tone remains at the center speaker and you can hear how the sound changes as you adjust the various frequency levels. To stop the test tone, press TEST.

SET MENU

INPUT 1 I/O ASSIGN (input/

output assignment)

You can assign jacks according to the component to be used if this unit’s DIGITAL INPUT jack settings (component names for jacks) differ from those of the component. This lets you to change the jack assignment and effectively connect more components.

Once assigned, select that component with INPUT l / h (or the input selector buttons on the remote control).

■1A for OPTICAL INPUT jack

Choices:

(1) DVD, MD/CD-R, CD, VCR, V-AUX,

 

D-TV/CBL

■1B for COAXIAL INPUT jack

Choices:

(2) CD, VCR, V-AUX, D-TV/CBL,

 

DVD, MD/CD-R

Note

•When you connect a component to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.

SOUND 6 HP TONE CTRL

(headphone tone control)

Use this feature to adjust the level of the bass and treble when you are using headphones.

Control range (dB):

 

BASS

–6 to +3

TRBL (treble)

–6 to +3

Initial setting:

 

BASS

0 dB

TRBL

0 dB

INPUT 2 INPUT MODE

(initial input mode)

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn this unit on (see page 23 for details about the input mode).

Choices: AUTO, LAST

AUTO

Select this setting to allow the unit to automatically detect the type of input signal and select the appropriate input mode.

LAST

Select this setting to set this unit to automatically select the last input mode used for the respective sources.

OPERATION

ADVANCED

 

 

English

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents HTR-5630RDS Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesAbout this manual Sophisticated AM/FM TunerSupplied accessories Getting StartedControl Front panel Controls and FunctionsSET Menu -/+ NextRemote control MuteProgram -/+ Handling the remote control Using the remote controlFront panel display Connections Connecting to digital jacksConnecting video components Connecting audio components Connecting a CD playerConnecting a CD recorder or MD Recorder Connecting the antennas Connecting the AM loop antennaFrequency Step switch General model only Connecting an external decoder Connecting the speakers Speaker placementSpeakers Connections Connecting to the Main a Speakers terminalsRear Speakers terminals Main Speakers terminalsCenter Speaker terminals Subwoofer jackTurning on the power Connecting the power supply CordsConnecting the AC power cord General model onlyUsing the basic menu Basic System SettingsSetup SP LevelYES SETSetting speaker output levels Setting the unit to match your Speaker systemPlayback ON/OFF inward onTo select the audio source connected to the 6CH Input jacks When you have finished using this unit Night listening modeBGV background video function To mute the soundDVD Input modes and indicationsAdventure Playing Dolby Digital EX or DTS ES Material Selecting PRO Logic or PRO LogicNormal stereo reproduction Virtual Cinema DSPUnderstanding sound fields Digital Sound Field Processing DSPHi-Fi DSP programs Recreating a sound fieldSound design of CINEMA-DSP CINEMA-DSPCINEMA-DSP Programs For audio-video sources No toStraight Decode For movie programsDolby Digital/DTS + DSP sound field effect Sound field effectsDolby Digital/DTS + Matrix 6.1 + DSP sound field effect Dolby Pro Logic + DSP sound field effectTuning Automatic tuningManual tuning Automatically presetting stations for FM Stations Presetting stationsManually presetting stations Tune in to a stationRepeat steps 1 to 5 to store other stations Selecting a preset station Exchanging preset stationsPress PRESET/TUNING Edit again Changing the RDS mode Receiving RDS StationsDescription of RDS data Press PTY Seek Mode to set the unit PTY Seek mode To cancel this functionPTY Seek function EON functionCanceling the sleep timer Sleep TimerSetting the sleep timer Press Sleep repeatedly until Sleep OFFRecording Special considerations when recording DTS materialAdjusting the items on the set Menu SET MenuSet menu list 1A Center center speaker mode Speaker mode settingsLRG SML1B Main main speaker mode 1C Rear LR rear speaker mode1D Bass bass out mode Setting by feet Setting by metersSpeaker distance Dynamic rangeSound 5 Center GEQ center Graphic equalizer Initial input modeInput 1 I/O Assign input Output assignment Headphone tone controlMemory guard 50dB20dB Setting the Speaker Levels Adjusting the volume during PlaybackUsing the test tone Sound Field Program Parameter Editing Changing parameter settingsRepeat steps 1 3 if you wish to alter other parameters Select a sound field programDigital sound field parameter descriptions For 5ch StereoCT Width Center width Troubleshooting Problem Cause Remedy Refer toGeneral No sound / weak Check SP Wires Remote control Problem Cause RemedyTuner Glossary Sampling frequency and number Quantized bits PCM Linear PCMSpecifications WB14680 NS-P100/ NS-P106 Important Safety Instructions Unit FCC Information for US customers only4m10m Voltage Selector For SW-P130Components of the Package Rear center speaker for NS-P106 Subwoofer Rear L Rear center Rear R For NS-P106Use the nonskid pads  Placing the subwooferUsing the Yamaha Speaker Stand SPS-80 option Mounting bracket AAX34790 Screw AAX12390 NS-P100 NS-P106 Connections How to Connect Before connectingAuto Standby HIGH/LOW/OFF switch Power switchVolume control Front panel Rear panel Automatic power-switching function  Frequency characteristics Advanced Yamaha Active Servo Technology for SW-P130 Problem Cause What to Do Power is not supplied even Problem Cause What to Do No soundThough the Power switch is set Standby mode automatically SW-P130  NX-E130, NX-C130WB32590 DVD-S540 EL 6475-E002 01/3 Important Safety InstructionsWe Want You Listening For a Lifetime FCC Information for US customers onlyFor Customer Use Laser Safety Contents Supplied accessories Symbols Used in this ManualIntroduction Environmental InformationFunctional Overview AC Power CordFront and Rear Panels Disc TrayStop Remote ControlPlay B PauseGeneral Notes on connections PreparationDigital Connections Analog ConnectionsVideo terminal a Video ConnectionsComponent Video terminal B Composite Video terminal 1, 2 CTurning on the power Inserting batteries into the Remote ControlSmart Power On/Off Using the Remote ControlBasic Playback OperationGeneral Operation Video control during playbackRepeat and Shuffle Repeat A-B DVD VCD CDOSD On-Screen Display Special VCD & Svcd Features Special DVD FeaturesTrack Digest Preview FunctionDisc Interval Track IntervalPicture CD & MP3 Playback Play ModeMP3 & Jpeg Navigator Auto PlaybackSpecial Jpeg Features Special MP3 FeaturesJpeg and MP3 simultaneous playback General Setup menu Setup MenuBasic Operation Disc LockSpeaker Setup Audio Setup menuOSD language Screen SaverEqualizer Sound Mode Digital Audio Setup3D Reverb Mode Digital OutputSetup the item as follows Video Setup menuTV Type TV DisplayPicture Setting Closed CaptionProgressive Color saturation Password SetupAudio language Preference Setup menuSubtitle language Disc Menu languageDefault Setup Parental Control DVDMP3/JPEG Navigator Problem Solution TroubleshootingMaintenance SpecificationsCleaning the Cabinet Cleaning DiscsLanguage Code 7967
Related manuals
Manual 106 pages 37.46 Kb

HTR-5630RDS specifications

The Yamaha HTR-5630RDS is a versatile and robust home theater receiver that delivers an exceptional audio experience for movie buffs and music lovers alike. Launched as part of Yamaha's renowned line of audio equipment, this model integrates advanced technologies tailored to enhance both sound quality and usability.

One of the standout features of the HTR-5630RDS is its compatibility with a wide variety of audio formats. It supports Dolby Digital and DTS decoding, which means it can process multi-channel audio signals that create an immersive surround sound experience. Whether you’re watching an action-packed blockbuster or a serene classical concert, this receiver ensures that every sound fills the room and envelops you.

In addition to its decoding capabilities, the HTR-5630RDS boasts a power output of 100 watts per channel, providing ample power for driving a full surround sound speaker system. Its high-current design ensures that it can deliver exceptional performance even with demanding speakers, offering a clear and dynamic soundstage. Moreover, the receiver features multiple audio inputs, including optical and coaxial digital connections as well as analog inputs, allowing you to connect various devices like gaming consoles, Blu-ray players, and streaming devices with ease.

The HTR-5630RDS also comes equipped with Yamaha's proprietary YPAO (Yamaha Parametricroom Acoustic Optimizer) technology. This feature automatically measures the acoustics of your room and adjusts settings to optimize sound performance based on your specific environment. This means that regardless of where you place your speakers, you can expect balanced and accurate sound reproduction.

For those who enjoy listening to the radio, the HTR-5630RDS includes an RDS (Radio Data System) tuner that provides information about FM radio stations, such as song titles, artist names, and other details. The user-friendly interface makes it easy to navigate through stations and select your favorites, enhancing your listening experience.

With its sleek design and comprehensive feature set, the Yamaha HTR-5630RDS stands out as an excellent choice for anyone looking to build a high-quality home theater system. Its combination of powerful amplification, advanced processing features, and user-friendly setup makes it an ideal addition to any entertainment setup. Whether you're enjoying a movie night with family or hosting a gathering with friends, the Yamaha HTR-5630RDS ensures that your audio experience will be nothing short of extraordinary.
Top Page Image Contents