Limited warranty coverage

Appendix

■Do not open/close camera doors in water.

■The camera will not float. Use the strap at all times.

■If water has entered the camera, remove the card. Allow all components to air-dry for at least 24 hours before using the camera.

■If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it.

■Wipe off dirt or sand from the door seals—debris could compromise the seal and cause a leak when in water.

■Do not subject the camera to temperatures lower than 0 (32° F) or higher than 40° C (104° F) for an extended time—the integrity of the seals may be compromised. Wait until camera reaches operating temperatures before using.

■Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.

■Service agreements may be available in your country. Contact a dealer of KODAK Products for more information.

■For camera disposal or recycling information, contact your local authorities. In the US, go to the Electronics Industry Alliance Web site at www.eiae.org or go to Kodak at www.kodak.com/go/support.

Limited warranty

Kodak warrants its digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for the warranty period specified on your KODAK Product packaging. Retain the original dated sales receipt. Proof of purchase date is required with any request for warranty repair.

Warranty service is only available from within the country where the Products were originally purchased. You may be required to ship Products, at your expense, to the

24	www.kodak.com/go/support