Tekxon Technology X52 Further information, Safety instructions, Maintenance and care, Photo tips

Page 37

11 Further information

11.1Safety instructions

Although this product is safe, please observe the following information and warnings.

Caution

1.Do not modify or dismantle the camera.

2.Contact your dealer for repairs and inspections.

3.Do not shake the camera or subject it to hard knocks. The camera may be damaged if it falls.

4.Ensure that no water or moisture enters the camera. This can cause short circuits and accidents.

Note

When using the flash, do not look directly into it, as this can damage the eyes.

11.2Maintenance and care

Please clean the body, lens and LCD as follows:

Do not use thinning or cleaning agents which contain petrol. This could damage the camera.

Clean the camera body with a soft cloth.

Lens: First remove dust with a lens brush. Then clean with a soft cloth.

Do not use powerful cleaning agents on the body and lens (contact your dealer if dirt cannot be removed).

Do not apply pressure to the LCD or use hard objects to clean it.

11.3Photo tips

For excellent photographs, please observe the following tips:

Do not move the camera quickly to prevent the photos being out of focus. Hold the camera steady when pressing the shutter release. Do not move the camera immediately after pressing the shutter release. Wait until you hear the sound signal before moving the camera.

Look at the subject through the viewfinder before pressing the shutter release.

Check the angle if the subject is backlit. Move to the side to reduce the backlighting.

In dark conditions, the flash or manual exposure setting should be used.

35

Image 37
Contents Digital Camera Page Table of contents Installing the software Contents of package Product properties IntroductionFive operating modes Parts of your camera Getting startedInserting the batteries Use two AAA micro batteries Inserting the card Inserting and removing the SD/MMC cardRemoving the card Attaching the carrying strapSwitching the camera off Switching the camera on and offBasic operation Mode,Video Mode,Recording mode Setting mode Play mode Using the mode buttons12M Taking a photograph LCDPage1 Photography mode is preset to single-shotRecording audio Making a video clip Making video clips LCD descriptionsViewing photos, videos and listening to sound recordings Thumbnail view Deleting a single photo Deleting photosDeleting all photos Formatting the memorySelecting the resolution directly Using the flashAccessing the flash mode directly Advanced operationChanging menu options Playback mode Photography modeList of menu options PAL Configuration modeSetting the image resolution Selecting the image modeExposure compensation Selecting EVSetting image effects Setting image qualityProtecting photos against accidental deletion Setting the driverViewing images on a television set Setting the date and timeSetting the Logo Installing the driver Installing the softwareInstalling the driver in DSC mode Supported operating systemsPage Installing the driver in Web Cam mode Page Transferring files to your PC USB power supply and webcam functionSpecifications 8MB Memory requirementTroubleshooting Maintenance and care Safety instructionsFurther information Photo tipsBattery tips