Tekxon Technology X52 manual Inserting and removing the SD/MMC card, Inserting the card

Page 9

3.3Inserting and removing the SD/MMC card

You can use SD or MMC cards to increase the memory capacity. Switch off the camera before inserting the card. Insert the card as follows (photographs, sound and video recordings are no longer

stored in the internal memory, but stored on the card).

Inserting the card

1

Insert the card in the card slot

 

until it locks into place.

Removing the card

Open the cover of the card slot. Press the card downwards briefly to unlock it. Remove or change the card and close the card slot cover again.

3.4Attaching the carrying strap

Attach the carrying strap for your convenience and for safety reasons.

1

2

Pass the loop of the carrying strap through the eye as shown in the illustration.

Pull the other end of the carrying strap through the loop of the thin cord and pull the carrying strap tight.

Caution

1.Do not hang the camera around your neck using the carrying strap to avoid danger. This applies to children in particular.

2.When carrying the camera on the strap, ensure that you do not hit the camera against anything.

3.When attaching the carrying strap, place the camera on a solid surface to ensure that it cannot fall down and be damaged.

7

Image 9
Contents Digital Camera Page Table of contents Installing the software Contents of package Introduction Product propertiesFive operating modes Parts of your camera Getting startedInserting the batteries Use two AAA micro batteries Inserting the card Inserting and removing the SD/MMC cardRemoving the card Attaching the carrying strapSwitching the camera on and off Switching the camera offBasic operation Mode,Video Mode,Recording mode Setting mode Play mode Using the mode buttons12M Taking a photograph LCDPage1 Photography mode is preset to single-shotRecording audio Making a video clip Making video clips LCD descriptionsViewing photos, videos and listening to sound recordings Thumbnail view Deleting a single photo Deleting photosDeleting all photos Formatting the memorySelecting the resolution directly Using the flashAccessing the flash mode directly Advanced operationChanging menu options Photography mode Playback modeList of menu options PAL Configuration modeSetting the image resolution Selecting the image modeExposure compensation Selecting EVSetting image effects Setting image qualityProtecting photos against accidental deletion Setting the driverViewing images on a television set Setting the date and timeSetting the Logo Installing the driver Installing the softwareInstalling the driver in DSC mode Supported operating systemsPage Installing the driver in Web Cam mode Page Transferring files to your PC USB power supply and webcam functionSpecifications 8MB Memory requirementTroubleshooting Maintenance and care Safety instructionsFurther information Photo tipsBattery tips