Swann SWPRO752CAM manual Connection Diagram, Camera’s cable

Page 7

Connection Diagram

1.

Connect the BNC output from the camera to the

4.

Connect the two wires on the end of the extension

 

extension cable.

 

cable to your DVR’s RS485 plug, and connect to

2.

Attach the RS485 plug to the wires on the

 

the back of the DVR.

 

 

 

camera’s cable.

5.

Plug the BNC output into a channel input on the

3.

Connect the DC jack on the end of the extension

 

DVR.

 

 

cable to the included power adapter.

3

5

4

This is the Device: PTZ setup screen from the DVR-4000’s menu system.

Your DVR’s PTZ screen will look similar or identical to this one.

Check your DVR’s documentation for more information about the PTZ Configuration Menu on your DVR.

Image 7
Contents PRO-752 Dome Important Safety Instructions Warranty Information, Verifications & WarningsIntroduction Package ContentsCompatibility Mounting the Camera Installation GuideConnecting the Camera Cable Connecting the RS485 Controller if requiredTo assign the command address of the PRO-752 Connecting the CameraHow it Works Configuring the DVR Configuring your DVRMain Menu -- Device -- PTZ Camera’s cable Connection DiagramHelpdesk / Technical Support Details