Swann SW211-WIP, SW111-WIP user manual „ Camera Panel

Page 10

„CAMERA Panel

-TRIGGER OUT: Click to turn on the trigger out connector of the camera. This button is available only when the connected camera supports the trigger out connector, which is used to control the external device connected to the camera, such as a light.

-SNAPSHOT: Click to capture a still image using the selected camera and save the file in the computer.

-RECORD: Click to start recording a video clip using the selected camera. Click again to stop recording and save the file in the computer.

-TALK: Click to speak out through the camera. This button is available only when the connected camera supports 2- way audio function.

-LISTEN: Click to receive the on-site sound and voice from the camera.

- 9 -

Page 9 Page 11
Image 10
Page 9 Page 11
Contents IP-3G ConnectCam 1000 Wireless Network Camera Contents Introduction Hardware RequirementInstallation Page Page Using Ultra View To launch the programItem features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ PAN-TILT Control Panel optional„ Video View Window and Camera List To add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the cameraManual recording To record videoTrigger recording by motion detection Schedule recording To configure the recording settings Page To playback the recorded video To set up motion detection options Page Information
Top Page Image Contents