Swann SW211-WIP, SW111-WIP user manual Contents

Page 2

Contents
Introduction	2
Installation	3
Using Ultra View	6
To launch the program	6
Item features	7
To add a camera	12
To remove a camera	15
To link to the Web page of the camera	15
To record video	16
To configure the recording settings	18
To playback the recorded video	20
To set up motion detection options	21
Information	23

- 1 -

Image 2

Contents IP-3G ConnectCam 1000 Wireless Network Camera Contents Introduction Hardware RequirementInstallation Page Page Using Ultra View To launch the programItem features „ Controls Panel„ View Selection Panel „ Camera Panel „ System Panel „ PAN-TILT Control Panel optional„ Video View Window and Camera List To add a camera Click Add New CameraPage Page To remove a camera To link to the Web page of the cameraTrigger recording by motion detection To record videoManual recording Schedule recording To configure the recording settings Page To playback the recorded video To set up motion detection options Page Information