Before You Begin
FCC Verification:
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be deter- mined by turning the equipment off and on, the user is encouraged to try to cor- rect the interference by one or more of the following measures:
·Reorient or relocate the receiving antenna
·Increase the separation between the equipment and the receiver
·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
·Consult the dealer or an experienced radio/TV technician for help
IMPORTANT NOTE: Prohibition against eavesdropping
Except for the operations of law enforcement officers conducted under lawful authority, no person shall use, either directly or indirectly, a device operated pursu- ant to the provisions of this Part for the purpose of overhearing or recording the private conversations of others unless such use is authorized by all of the parties engaging in the conversation.
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS:
·Make sure product is fixed correctly and stable if fastened in place
·Do not operate if wires and terminals are exposed
Troubleshooting Guide
Problem: I can’t see the camera on my TV.
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the correct input channel.
Problem: The image is too far away.
Solution: Change the lens to the larger telephoto lens for a zoomed in image. Unscrew the attached lens and replace with telephoto lens.
Problem: The BNC Extension Cable will not connect to my TV.
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable and plug into the TV.
Problem: On my Swann DVR, Video Loss appears where my camera should be.
Solution: Check the Extension cable is securely connected to the camera and check the connection is secure on the back of the DVR. Also ensure the camera has power by trying a second power outlet.
Technical Specifications
Video |
|
Image Sensor | 1/3” Colour Super CMOS |
Video Quality | 400 TV Lines |
Number of Effective Pixels | NTSC: 510 x 492 / PAL: 628 x 582 |
Signal / Noise Ratio | > 50dB |
Electronic Shutter | 1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL |
White Balance | Automatic |
Gain Control | Automatic |
Backlight Compensation | Yes |
Day/Night Mode | |
Minimum Illumination | 0 Lux (IR on) |
Lens | 4mm |
Viewing Angle | 90 degrees |
General |
|
Indoor/Outdoor | Indoor Only |
Operating Power | DC 12V |
Operating Temperature | 0°C ~ 45°C / 32°F ~ 113°F |
Body Construction | Heavy duty plastic |
Dimensions - Camera & Stand | 4.25” x 2.75” x 1.75” / 108mm x 69mm x 44mm |
Weight – Camera & Stand | 4.2oz / 125g |
2 | 7 |