Speco Technologies CVC-927PTZ How to control the On-Screen Menu Utility, Zoom Handle twist

3.3 How to control the On-Screen Menu Utility

				Action					Function
									Call the On-screen menu utility
				MENU
									Go into the sub-menu items.
									Execute the command(exit)
Joystick							left or right
									Change value.
									Navigate through the menu items.
						up or down			Navigate through the menu items.
Joystick
								down	Finish editing title.
			Joystick
									Change value.
	Zoom			handle twist
									Enter editing title mode.
									Change value of angle
		CTRL + Joystick
									Escape (EXIT)
					ESC

3.4 Auto Scan (First Item of the Main menu / Shortcut:

SCAN)

The Auto scan supports up to 8 programmed angles at user-programmable speeds. Follow these steps to program Auto Scan:

AUTO SCAN SETUP

SCAN 01	:	AUTOSCAN01
SPEED(MODE) :		FAST VECTOR
START ANGLE :		127.1, 027.7	X7
END ANGLE	:	157.7, 080.7	X13
SCAN DIR.	:	CCW
SWAP	:	OFF
SAVE AND EXIT		(ESC TO CANCEL)

HOLD DOWN CTRL KEY

WHILE SELECT POSITION.

SPEED(MODE) : NORMAL1~NOMAL9,SLOW VECTOR,FAST VECTOR NORMAL1 (SLOWER) ↔ NORMAL9 ( FASTER)

SLOW VECTOR, FAST VECTOR : Move from start point to end point including tilt and zoom simultaneously and linearly. In case of HID2404HCExxx model, zoom is fixed at more wide angle and the zoom magnification information is not displayed.

12