3.10Area Title (Sixth Item of Main menu)
Enter a specific name on programmed angle between START and END. For the screen below, when the camera points at an angle between 124.3° to 359.5°, ABC will be displayed on the screen.
| AREA TITLE SETUP |
| |
NO | TITLE | START | END |
01 | ABC | 124.3 | 359.5 |
02 | xxxxxxxxxxxxxxxx | ===== ===== | |
03 | xxxxxxxxxxxxxxxx | ===== ===== | |
04 | xxxxxxxxxxxxxxxx | ===== ===== | |
05 | xxxxxxxxxxxxxxxx | ===== ===== | |
06 | xxxxxxxxxxxxxxxx | ===== ===== | |
07 | xxxxxxxxxxxxxxxx | ===== ===== | |
08 | xxxxxxxxxxxxxxxx | ===== ===== | |
SAVE AND EXIT(ESC TO CANCEL)
HOLD DOWN CTRL KEY TO MOVE
PAINNING AND SET AREA ANGLE.
Pages can be scrolled through by pushing the Joystick to the Left or Right on the first or last column of the menu. Pushing the Joystick to left on the “NO” column (01 ~ 08) of the menu to scroll to the previous page. Push the Joystick to right on the “END” column to go to the next page.
1.Press MENU to display the main menu on the monitor. Select the Area Title option by pushing the Joystick up or down and push to right to enter the detail menu.
2.Select the area number by pushing the Joystick up or down. Select Start, End or number column to be set by pushing the handle to the right or left. The selected column will be highlighted.
3.To enter area title, select the number column and rotate the handle clockwise or counterclockwise. You can select alphanumeric characters by rotating the handle. Move to the next character by pushing the Joystick to the right. To finish entering the title, push the Joystick down.
4.To adjust panning limit, press the CTRL/PGM key and hold down. Then use the Joystick to go the desired direction. The end limit must be in an increasing direction. (Start < End).
5.When you press the CTRL/PGM key, the current position of the pan will be printed in the highlighted column. With this feature, you can easily set the next start point as the previous end point.
6.Select the Save and Exit option by pushing the Joystick up or down. Save and exit the program by pushing the Joystick to the right. Press ESC to exit the program without saving.
Pressing the HOME key will delete programmed data. (Angles will be turned ====
immediately.)
19