Speco Technologies CVC8515DNVW, CNC5915DNVW instruction manual Back LightBLC, Return

Page 16

*RETURN:

Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.

NOTE

*Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x256).

*The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear.

*When SENS-UP is activated the increased magnification can induce noise and pixelation; this is quite normal.

Back Light(BLC)

This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome

even strong backlight conditions.

BLC

 

 

 

 

GAIN

MIDDLE

AREA

 

 

 

 

 

 

 

 

 

 

 

 

DEFAULT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RETURN

RET

*OFF: BLC function does not operate.

*BLC: Select LOW/MID/HIGH

User can select and define a specific area in scene and view the area clearly.

Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.

Press the "ENTER" button again after area setting, you can change the area like a picture 2.

Default: Press the Default to return to factory defaults.

- 16 -

Image 16
Contents Intense-IR Camera ISO14001 Contents Precautions Sefety Instructions DNR WDRDC Auto Iris Varifocal Lens5mm-50mm / IR LED Built-in 35pcs OSD Control Button How to Set Up the camera menu Setup Menu ͵ͲΊ͠Ϳͺ΅ ͲΆ΄΅ Ϳ͠ͷͷ ͲͺͿ Ͳ͠Έ ΄ͶͿ΄Ͷ͞Ά͙͑Ωͥ͑ί͑Ω͚ͧͥ ͵ͺͷͷͶͶͿʹͶ͙͑͑͢ί͚ͧ ͵ͶͷͶʹ΅ ΄΅Ͳ΅ ΅ΆͿ Menu Set Up Change menu settings using the Left or Right button LensPress the Return to return to the Setup menu ExposureAgcauto Gain Control Back LightBLC ReturnPicture Hsblc OFF White Balance ATW Auto Tracking White BalanceDay / Night BW This picture is always displayed in black and whiteArea Smart IR OFF 3DNR Select one of the mode using the Up and Down button Special▷ → Cases where the wrong Camera ID has been input Effect Mirror Flip the image horizontally on the screenMirror on Motion Privacy Defect Adjust Select the desired mode by using Up or Down buttonReset Resets the camera settings to the factory defaultsTrouble Shooting Problem Possible CauseProduct Warranties and Information Effective July 8 Memo Memo Memo Memo Memo New Highway Amityville, NY 800 645