White Balance

The White Balance function is used to control the “on-screen” colors.

1.Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.

2.Select the desired mode by using the Left or Right button.

	SETUP
1.LENS	DC
2.EXPOSURE
3.WHITE BAL	ATW
4.DAY / NIGHT	COLOR
5.3DNR	ON
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT

*There are three user selectable White Balance settings available.

*ATW : (Auto Tracking White Balance)

Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)

*AWB : The White Balance is automatically adjusted in a specific environment.

*AWC → SET : To obtain the best results press the SET button while the camera is focused onto white paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.

*MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and B-Gain(Blue) while monitoring the color of the image.

WHITE BAL MANUAL

BLUE

RED

RETURN

21 RET

- 19 -