Speco Technologies CVC8515DNVW, CNC5915DNVW instruction manual Motion

2-3) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.

2-4) NEG. IMAGE :

ON : Activates negative image just like film

OFF : Normal image

2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.

3. MOTION

MOTION
AREA SELECT	AREA1
AREA DISPLAY	ON
SENSITIVITY	40
MOTION VIEW	OFF
RETURN	RET

POSITION

SIZE

3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu. AREA SELECT : You can select from area 1~4 position.

AREA DISPLAY) ON: Display the Motion Detected area on the screen. You can set the location and size like a picture 1,2.

SENSITIVITY: To setup the motion sensitivity. You can adjust the motion sensitivity of a movement between level 0~40.

MOTION VIEW : If camera detects movement, the words of "MOTION DETECTION" will appear on the monitor.

RETURN : To return to the SPECIAL menu after completing the setup.

- 28 -