Speco Technologies SIPT5 Protocol SIPSD10X only, Baud Rate Setting SIPSD10X only

Page 93

010100XXXX	10	000001XXXX	32	011011XXXX	54
110100XXXX	11	100001XXXX	33	111011XXXX	55
001100XXXX	12	010001XXXX	34	000111XXXX	56
101100XXXX	13	110001XXXX	35	100111XXXX	57
011100XXXX	14	001001XXXX	36	010111XXXX	58
111100XXXX	15	101001XXXX	37	110111XXXX	59
000010XXXX	16	011001XXXX	38	001111XXXX	60
100010XXXX	17	111001XXXX	39	101111XXXX	61
010010XXXX	18	000101XXXX	40	011111XXXX	62
110010XXXX	19	100101XXXX	41	111111XXXX	63
001010XXXX	20	010101XXXX	42
101010XXXX	21	110101XXXX	43
011010XXXX	22	001101XXXX	44

2.4.7PROTOCOL (SIPSD10X only)

7th~8th dip switches are used for Protocol Setting. Factory Default: Pelco-D or Pelco-P ( Auto detection)

DIP SW1- 7	DIP SW1- 8
OFF	OFF	Pelco-D or Pelco-P

2.4.8BAUD RATE SETTING (SIPSD10X only)

The 9th Dip Switch is used for BAUD RATE setting.

DIP SW can be changeable to 2400bps, 9600bps.

Factory Default: 9600bps.

DIP SW1 9th	BAUD RATE
OFF	2400
ON	9600

2-89

Image 93

Contents Speco Internet Protocol SIP Series Table of Contents Appendix Page Features Dimensions Dimension and Connector DescriptionSIPD3 SIPD4 SIPT5 SIPSD10X Sipmpb Sipmpd ① 12 Volts DC Power Input ② Audio Output Connector Description⑧ OSD control joystick Installation Setup your PC network Preparation before setupStep Double-click the Network and Internet connections icon Step Click the OK button and the window dialog box closes Configuring the IP device Page Video Display Page Host Setting Host Setting100Mbps / Full duplex WAN Setting WAN Setting Page SNTP/NTP Date SettingManually set date and time will be gone, if power off Video setting Video SettingMPEG4 Only Video Adjustment Page Camera setting Camera SetupOUTDOOR1 Select the outdoor white balance BLC Camera Setup PTZ camera modelSelect exposure mode PTZ PT/TZ Camera only Page User Account Management System info System InfoPage Firmware Upgrade You can always get the latest version at our website Factory Default Save Reboot Logout Function OSD SettingF T Down Setup OSD Menu SettingOperating Camera OSD Menu Page Brightness Page Page Page OFF / LOW / Middle / High OFF / on Auto Gain Control AGCWhite Balance Wite BAL Page When selected ‘GAIN’ menu OFF, DNR will not work Intensifier Next Camera Title Page Camera Title Sync Privacy Reverse Detail Default Operating Camera OSD Menu SIPSD10X only Dome SET Recover Default SettingDome SET Camera ID Dome SET Manual SpeedDome SET Next page Password Dome SET AlarmDome SET Zoom Speed Dome SET LanguageDome SET Next page OSD Display Enter Password By Entering Preset Code ConfirmDome SET Next page Initialization Dome SET Next page System StatusTour Clear Are YOU SURE? YES no Dome SET Next page Exit Dome SET Next page Save and ExitCamera SET Camera SET FlickerlessCamera SET D/N Mode Camera SET WB ModeCamera SET DSS Mode Digital Slow Shutter Camera SET D ZoomPreset Preset no Preset SETPreset Preset ID Preset PAN XXX.X TiltPreset Exit Preset SaveAuto Scan SET Auto SCAN- Start AngleAuto Scan Speed Auto Scan EndlessAuto Scan Dwell Time Auto Scan Save and ExitTour SET Tour SET Preset noTour SET Tour no Tour SET Tour TitleTour SET Save Tour SET SpeedTour SET Exit Privacy SETPrivacy SET Save Privacy SET ACTIONMOVE/ADJUSTPrivacy SET Exit Pattern SETPattern SET Patt Title Pattern SET Patt noPattern SET Data Fill Pattern SET SaveAlaram SET Alarm no Alarm SETAlaram SET Alarm Input Alaram SET Alarm ACT Sector SET Default Setting Sector SET Sector no Sector SET Sector ID Sector SET Sector StartSector SET Save Sector SET ExitExit ID Setting SIPSD10X only DIP SW Setting SIPSD10X onlyProtocol SIPSD10X only Baud Rate Setting SIPSD10X onlySIP Camera Series AppendixCamera Spec SIPB2 SIPD3 SIPD4 SIPT5 BLC On / OFF DNS, DDNS, NTP, ICMP, IGMP, ARP, #GPP Sipmp Camera SeriesCamera Spec Sipmpd SIPMPT5