Speco Technologies CVC-6246IHR manual Operating your camera Camera Title ②

Operating your camera – CAMERA TITLE ②

③Press SET button to access the SETUP mode.

④ You can enter up to 15 characters.

a. Move the cursor to character-enter location by using the LEFT or RIGHT button.

b. Select the desired character by using the UP or DOWN button. c. Press SET button to confirm the blinking character. The first

character is saved and the cursor in the bottom of the screen moves to the next position.

d. Repeat steps a, b and c until you create the full name you want. e. Select the position at which the CAMERA ID will b located on

the screen.

-Move the cursor to ‘POS’ and press SET button.

-Select the position by using the 4-directional buttons, then press the SET button to confirm the position.

f. When completed, move the cursor to ‘END’ and press SET button.

Notes

If you make a mistake while entering a name move the cursor “ CLR”. Press “SET” button.

After erasing the character from right to left, correct the character again.

26