Troubleshooting
If you have trouble operating your camera, refer to the following
Problem | Solution |
|
|
Nothing appears on | ● Check that the power cord and line connection |
the screen. | between the camera and monitor are proper |
| ● Check that you have properly connected VIDEO |
| cable the camera VIDEO output jack. |
|
|
The image on the | ● Is lens stained with dirt? Clean your lens with |
screen is dim. | soft, |
| clean cloth. |
| ● Set the monitor to proper condition. |
| ● If the camera is exposed to too strong light |
| change the camera position. |
| ● Adjust the lens’ focus properly. |
The image on the | ● Adjust the contrast feature of the monitor. |
screen is dark. | ● If you have an intermediate device, set the |
| |
|
|
The camera is not | ● Check that you have properly connected |
working properly, and | the camera to an appropriate power source. |
the surface of the |
|
camera is not. |
|
|
|
MOTION DETECTION | ● Have you set ‘MOTION DET.’ menu to off? |
function is not active. | ● Have you set ‘MD LEVEL’ to too how? |
| ● Have you set ‘MD ARAEA’ properly |
|
|
35