Speco Technologies HTSD10X manual Protocol, Baud Rate Setting, Terminations

DIP SWITCH SETTING

A-3. PROTOCOL

7th~8th dip switches are used for Protocol Setting. Factory Default: Pelco-D or Pelco-P ( Auto detection)

DIP SW1- 7	DIP SW1- 8
OFF	OFF	Pelco-D or Pelco-P

A-4. BAUD RATE SETTING

The 9th Dip Switch is used for BAUD RATE setting.

DIP SW can be changeable to 2400bps, 9600bps.

Factory Default: 2400bps.

DIP SW1 9th	BAUD RATE
OFF	2400
ON	9600

.

A-5. 485 TERMINATIONS

10th Dip Switch is used for 100Ω termination.

Set on 10th Dip Switch only for the last looped camera from the controller. Even in case of only one camera, set on 10th Dip Switch of the cameras.

26