OSD MENU SETTING
I. ALARM SET
4 Alarm inputs are available and each alarm can activate presets, group tours or patterns.
ALARM SET |
| ||
ALARM NO | : 01 | DEFAULT SETTING | |
ALARM INPUT: OFF | |||
| |||
ALARM ACT | : 001 |
| |
SAVE |
|
| |
EXIT |
|
| |
I-1. ALARM SET – ALARM NO.
Up to 4 alarms are selectable by using the joystick to the right when the cursor is on ALARM NO.
Input alarm provides two different ways - NC (Normal Close) or NO (Normal Close)
I-3. ALARM SET – ALARM ACT
Alarm activates various surveillance modes with Preset number up to 164, Group tour up to 8, Pattern up to 8. Move the joystick to the right or left direction to select any preset number, group tour no. or pattern no.
I-4. ALARM SET – SAVE
After setting the alarm input parameters, to save the data, move the joystick to the right when the cursor is on SAVE. After saving the data, the cursor moves to Alarm NO.2 automatically to prepare the next alarm.
I-5. ALARM SET –EXIT
To escape this page, move the joystick to the right
*Before activating an Alarm, user must set ALARM ENABLE at DOME SET – ALARM – ENABLE (Refer to page 15)
23