BIOS Setup

USB Device Wakeup From S3

This item allows the activity of the USB device to wake up the system from S3 (suspend to RAM) sleep state. Setting: [Enabled], [Disabled].

Keyboard PowerOn Function

This controls how and whether the PS/2 keyboard is able to power on the system.You must type the password to power on the system. Settings: [Disabled], [Any Key], [Specific Key].

Specific Key for PowerOn

Specify the password to enable for the Keyboard PowerOn Function while setting to [Specific Key].

Mouse PowerOn Function

This controls how and whether the PS/2 mouse is able to power on the system. Settings: [Disabled], [Any Action], [Left-button] and [Right-button].

Resume On PME#

This field specifies whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Settings: [Enabled], [Disabled].

Resume On RTC Alarm

This is used to enable or disable the feature of booting up the system on a scheduled time/date from the soft off (S5) state. Settings: [Enabled], [Disabled].

RTC Alarm Date/Hour/Minute/Second

If Resume On RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields. Available settings for each item are:

Alarm Date

01 ~ 31, Every Day

Alarm Hour

00 ~ 23

Alarm Minute

00 ~ 59

Alarm Second

00 ~ 59

MSI Reminds You...

If you have changed this setting, you must let the system boot up until it enters the operating system, before this function will work.

3-15