MSI 848P NEO-V - Motherboard - ATX manual Connectors, Floppy Disk Drive Connector FDD1

MS-6788 ATX Mainboard

Connectors

The mainboard provides connectors to connect to FDD, IDE HDD, LAN, USB Ports, and CPU/System/Power Supply FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

FDD1

Fan Power Connectors: CPUFAN1/SYSFAN1

The CPUFAN1 (processor fan) and SYSFAN1 (system fan) support system cooling fan with +12V. It supports three-pin head connector. When connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.

GND +12V Sensor

GND +12V Sensor

CPUFAN1SYSFAN1

MSI Reminds You...

1.Always consult the vendors for proper CPU cooling fan.

2.Please refer to the recommend CPU fans at Intel® official website.

CD-In Connector: CD1

The connector is for CD-ROM audio connector.

CD1

R

GND

L

2-14