Power Management/APM
Setting to [Enabled] will activate an Advanced Power Management (APM) device to enhance Max Saving mode and stop CPU internal clock. Settings: [Enabled], [Disabled].
Suspend Time Out (Minute)
If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Settings: [Disabled], [1], [2], [4], [8], [10], [20], [30], [40], [50], [60].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[On/Off] | The power button functions as a normal |
| button. |
[Suspend] | When you press the power button, the computer enters |
| the suspend/sleep mode, but if the button is pressed for |
| more than four seconds, the computer is turned off. |
Set Monitor Events
Press <Enter> and the following
FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified hard- ware peripherals or components. If set to [Monitor], any activity detected on the specified hardware peripherals or components will wake up the system or prevent the system from entering the power saving modes. Settings: [Monitor], [Ignore].
Set WakeUp Events
Press <Enter> and the following
