MSI 848P NEO-V - Motherboard - ATX manual OnBoard LAN, AC’97 Audio, Set Super I/O, OnBoard FDC

BIOS Setup

OnBoard LAN

This setting controls the onboard LAN controller. Setting options: [Disabled], [Enabled].

AC’97 Audio

This item is used to enable or disable the onboard AC’97 (Audio Codec’97) feature. Selecting [Auto] allows the mainboard to detect whether an audio device is used. If an audio device is detected, the onboard AC’97 controller will be enabled; if not, the controller is disabled. Disable the function if you want to use other controller cards to

connect an audio device. Settings: [Disabled] and [Auto].

Set Super I/O

Press <Enter> to enter the sub-menu and the following screen appears:

OnBoard FDC

Select [Enabled] if your system has a floppy disk controller (FDD) installed on the system board and you wish to use it.

Option	Description
[Auto]	BIOS will automatically determine whether to enable the
	onboard Floppy controller or not.
[Enabled]	Enables the onboard Floppy controller.
[Disabled]	Disables the onboard Floppy controller.

Onboard Serial Port A

This item specifies the base I/O port addresses of the onboard Serial Port 1 (COM A). Selecting [Auto] allows AMIBIOS to automatically determine the cor- rect base I/O port address. Settings: [Auto], [3F8/COM1], [2F8/COM2], [3E8/ COM3], [2E8/COM4] and [Disabled].

Onboard Parallel Port

This field specifies the base I/O port address of the onboard parallel port. Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port address. Settings: [Auto], [378], [278], [3BC] and [Disabled].

Parallel Port Mode

This item selects the operation mode for the onboard parallel port: [ECP], [Normal], [Bi-Dir] or [EPP].

3-21