Speco Technologies HTSD10X manual Quick Operating Keys, Quick Operation Key , Pelco D, P

QUICK OPERATING KEYS

1-64 + preset and 101~200 + preset are used for preset and 65-100 + preset used for functions.

For example, to enter OSD MENU, press the button 95 +PRESET.

<Quick Operation Key Table 1, Pelco - D, P>

	Number	Note
1 ~ 64, 100~200 +Preset		PRESET
65	+ Preset	PRESET STATUS
66	+Preset	AUTO SCAN
67	+Preset	AUTO FLIP
71~78 +Preset		GROUP TOUR
81~88 +Preset		PATTERN
91	+ Preset	ZERO POSITION
92	+ Preset	FREEZE
93	+ Preset	BLC MODE
94	+ Preset	D/N MODE
95	+ Preset	OSD MAIN MENU
96	+ Preset	FOCUS ADJUST
97	+Preset	ALARM

Function

Executing Preset 1 ~ 64

Display Preset Status

Executing Auto Scan

Selectable On/Off/Auto in Auto Flip function Executing Group Tour #1 ~ #8 Executing Pattern #1 ~ #8

Selectable On/Off in BLC function Selectable Day/Night Mode (Auto/Day/Night Mode) To enter OSD Main Menu

Focus adjusting

Selectable Enable/Disable all Alarms

<Quick Operation Keys Table 2> Use these function keys if controller has these keys>

Menu	Function
Tilt Up / Down	Sub menu cursor moves up / down
Pan Left / Right	Enter to the sub menu or status change or decrement
Focus Near	Using for Enter key when user select YES or NO
Focus Far	Using for function changing keys when set coordinate
Zoom Tele	Status cursor to the right
Zoom Wide	Status cursor to the left

* 65 + preset: Status Report , If user presses any key, it disappears.

8