High Performance Stereo Amplifier

This power amplifier has been designed to provide high Quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring so this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

HELP!

1-800-645-4994

Monday-Friday 8:30am - 7:00pm Eastern

Saturday

9:00am - 5:00pm Eastern

SPECIFICATIONS

Maximum Output Power:	600 Watts	Filter type:	Selectable Full/Low-pass
	300 Watts RMS		Crossover @ 18dB/Octave
	@ 4 Ohms	Filter Crossover:	LPF 50-250 Hz (variable)
Output Impedance:	2 - 8 Ohms (Mono)		HPF 50-250 Hz (Variable)
Frequency Response:	10 - 30KHz. 1 dB	Bass Boost Level:	0 - 18dB (Variable)
Signal / Noise Ratio:	90 dB	Bass Boost Level:	0 - 18dB (Variable)
Signal / Noise Ratio:	90 dB	Bass Boost Frequency:	40 - 80Hz (Variable)
Input Impedance:	Low-Level 10K Ohms	Bass Boost Frequency:	40 - 80Hz (Variable)
Input Impedance:	Low-Level 10K Ohms	Supply Voltage:	12 volts, negative ground
	High-Level 100 Ohms	Fuse Rating:	20 amps.
Input Sensitivity:	Low-Level 200 mV - 8 V	Dimensions (W X H X D):	295 mm X 54.3 mm X 230 mm
	High-Level 2V - 10 V		11-5/8" X 2-1/8" X 9”
			11-5/8" X 2-1/8" X 9”

* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.

-3-