Set the Camera | Tasco 119223C instruction

Camera OPERATION (continued)

area, press the MENU button, then step away from the camera. Move straight back from the camera to find the length (depth) of the sensor detection zone, and move left or right to check the width (edges) of the detection zone (note that it becomes wider as you move farther back-see below). When you no longer see the red PIR indicator flash as you move around, you are past the limits of the coverage area. Reposition the camera if necessary. When you finish testing the camera, press and hold MENU to exit Menu mode.

3. Set the Camera

Make sure the camera’s power is turned on, and make sure a new or empty SD card has been inserted, then leave the area-there is a 30 second delay after power on before the first photo is taken. Batteries typically last 90 days or more, depending on how often the Cam is activated by events, how often the flash fires, ambient temperature, etc.

4. Secure the Camera

A standard padlock may be used in the camera’s lock hole to secure it and prevent theft.