Jenoptik 5.0z3 manual Inserting the Batteries, Low Battery Indicator, Inserting a Memory Card

Page 6

GETTING STARTED

INSERTING THE BATTERIES

The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 1000 mAh / 1.2V) batteries.

1.Slide the battery cover open.

2.Insert two AA-size alkaline batteries with the positive(+) and negative(-) poles matching the directions indicated inside the battery room.

3.Slide the battery cover closed.

Low Battery Indicator

A low battery indicator appears on the LCD screen when the batteries are nearly exhausted. Batteries should be replaced promptly when the low batteries indicator appears.

Note:

•Do not use manganese batteries. Manganese batteries cannot supply sufficient power to support camera operation.

•Replace all batteries at the same time. Never mix old and new batteries.

•Remove batteries from the camera if you do not plan on using it for more than two weeks.

•The camera body may feel warm after extended use. This is normal.

INSERTING A MEMORY CARD

You can use SD Card or MMC Card with this digital camera. The memory card slot is located beneath the battery cover, adjacent to the battery compartment.

1.Be sure that the camera is turned off.

2.Slide the battery cover and open it.

3. Insert the card with the label facing up and the arrow pointing in.

4. Close the battery cover.

5

Image 6

Contents User’s Guide Table of Contents Advance Settings Standard Accessories Getting StartedAttaching the Wrist Strap Top Using the Soft CaseNames of Parts Bottom BackLow Battery Indicator Inserting the BatteriesInserting a Memory Card Setting the Date and Time About Camera MemoryDCF Protocol Playback mode Power Saving FunctionRecord mode Basic OperationsMenu Item Available Setting for movie Using the MenusMenu Item Available Settingfor still image Menu Item Available Setting for playbackSetup Menu Menu Item Available SettingADJ. Menu Using the LCD Monitor LCD Screen IndicatorSwitching the Screen Display Using the Zoom Function RecordingRecording Still Images Using the Flash Using the Self-timer & BurstDisplay Option Description Using the Macro mode SECRecording Movie Clips Setting the Recording FunctionsUsing the Scene Mode Voices RecordingSetting the Resolution and Quality Resolution Option DescriptionQuality Option Description Setting the ISO Setting the Movie SizeSetting the White Balance Option DescriptionSetting the Sharpness Setting the ExposureSetting the Metering Setting the Photo EffectPlayback Setting Date StampUsing the Thumbnail Magnifying Still ImagesPlaying Back a Voice Memo Playing Back SoundsRecording a Voice Memo Deleting FilesDeleting All Files Protecting FilesChanging the Image Size Editing ImagesRotating Still Images Adding Stickers to a Still ImageSetting the Dpof Playing a Slide ShowSetting Auto Review Advance SettingsAdjusting Sounds Setting the Power SaveAbout the Folder & File Name Setting the LanguageResetting the File Numbers File NamingSetting the TV OUT Setting USB PortChoosing a Startup Image Making Connections Resetting to Default SettingsConnecting the Camera to a TV Formatting the MemoryConnecting the Camera to a PC Using the Card ReaderConnecting the Camera to a Computer with a USB Cable Software Installationfor Windows Users Using the Installer Splash ScreenSystem Requirements Installing Your Camera Driver StepInstalling Xvid Codec Select restart your computerStep Click Next Step Click Install Installing Windows Media Player Click Finish StepRead the License Agreement, then click I Accpet Step File Exit Click Yes Installing Adobe Acrobat Reader Optional Recomposing data ... status bar appear Step Click Finish Using Arcsoft Photoimpression Windows only Connect the camera to the computerTroubleshooting Problem Cause SolutionAppendix Specifications USA and Canada China Getting HelpCamera Information Computer Information Japan EuropeSafety Tips and Maintenance Precautions for the cameraPrecautions for batteries Precautions for SD Memory CardsRegulatory Information Information