Attaching the Camera to a Monitor
Attaching the Camera to a Monitor
Note: If you are installing a second monitor for a iPower 900 system, be sure to install the iPower 70 camera on the NTSC or PAL monitor and not on the VGA monitor. If you are installing a second monitor for a Concorde•4500 or Venue•2000 system, be sure to install the iPower 70 camera on the main monitor and not on the graphics monitor.
To attach the camera to the monitor:
1.Clean the top of the monitor using a dry cloth. This helps the adhesive on the bottom of the Velcro® to adhere securely.
2.Without removing the backing from the adhesive strips, position the camera on the top center of the monitor with the front base of the camera within 0.75 inch (2 centimeters) of the front of the monitor a .
3.With a pencil, mark the top of the monitor to indicate exactly where you will be attaching the camera.
4.Remove the camera from the monitor and peel off the adhesive backing from the Velcro strips.
5.Align the camera with the marks you made and firmly press it onto the top of the monitor.
a
7