Polycom 70 manual Before Installing

INSTALLING THE IPOWER 70 ROOM CAMERA

Before Installing

Warning

Before you begin this procedure, make sure you turn off your collaboration system’s power switch.

To install this camera, you will need:

❑The 8-pin camera cable a (labeled with the 8 icon on both cable collars) that came with your collaboration system, the WorldCart™, or the Premier Cart. (A camera cable is not supplied with this camera.)

❑One of the following systems:

•iPower 900 system, software version 1.0 or higher

•Concorde•4500™ system, software version 6.50 or higher

•Venue•2000™ system, software version 1.3.50 or higher

❑A pencil

❑A flashlight (optional)

a

4