USING THIS UNIT
1 Press POWER to turn this unit on. (The status indicator (LED) lights up.)
2 Start playback of your computer’s media
3 player or your portable audio player.
Note
Do not unplug the USB cable from your computer during playback. Doing so may cause your computer to freeze.
y
•When connecting to your computer, we recommend that adjusting the volume level using VOLUME on this unit after setting the volume level of your computer and media player to the maximum.
•When not using this unit, turn its power off to save power.
■About the non-skid pad
When playing back a source with low frequency sounds, this unit may vibrate. To get rid of the vibration noise, attach the supplied
Non-skid pad
Stand
■After using this unit
1 Rotate VOLUME to set this unit’s volume level to the minimum.
2 Stop playback of your computer’s media player or your portable audio player.
3 Press POWER to turn this unit off. (The status indicator turns off.)
Note
Do not pull forcibly on the USB cable when disconnecting it. Doing so may damage the USB cable/plug.
About the status indicator (LED)
LED status | The current status of this unit |
|
|
Lit | This unit is on. |
|
|
Off | This unit is off, or power supply is |
| not connected. |
|
|
Turning on and | Limiter control has been activated |
off repeatedly | due to excessive input. |
| (Turn down the volume level until |
| the LED stops flashing.) |
|
|
6En