Yamaha NX-U10 When using the USB/AC adaptor, Check the drive name selected above Click OK

Page 8
4 Connect an audio output jack of your portable audio player and the PORTABLE jack of this unit using the supplied 3.5 mm stereo mini plug cable.
5 Plug the USB/AC adaptor to the AC wall outlet.
6 Put this unit on a flat surface (a desk etc.) using the stand.
Note
When setting up this unit, do not apply force to the top of this unit. Doing so may cause damage or break the stand.

When the inserted Windows 98SE CD-ROM is not recognized

Even when the CD-ROM is inserted, your computer may display an error message if it cannot find the location of the CD-ROM drive. In this case, it is required to specify the location manually.

If this error occurs during installation of USB Human Interface Device:

Window: [Disc insertion] (Error message)

TClick [OK]

Window: [Open]

Drive (V):(Pull-down menu)

Select the drive in which the CD-ROM is inserted “Folder (F):” (Field)

Select [win98] “Filename (N):” (Field)

Select [base6.cab]

TClick [OK]

Window: [Copy File]

File Copy Source (C):” (Field)

Check the drive name selected above

TClick [OK]

Check “Windows has finished installing the software that your new hardware device requires.” is displayed

Click [Finish]

If this error occurs during installation of USB Audio Device:

Window: [Disc insertion] (Error message)

TClick [OK]

Window: [Open]

Drive (V):(Pull-down menu)

Select the drive in which the CD-ROM is inserted “Folder (F):” (Field)

Select [win98] “Filename (N):” (Field)

Select [driver21.cab]

TClick [OK]

Window: [Copy File]

File Copy Source (C):” (Field)

Check the drive name selected above

TClick [OK]

Check “Windows has finished installing the software that your new hardware device requires.” is displayed

Click [Finish]

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Macintosh is a trademark of Apple Computer, Inc., registered in the United States and other countries.

2 When using the USB/AC adaptor

 

Large USB plug

The supplied

 

 

USB/AC adaptor

 

Computer, Portable

5

 

audio player etc.

 

Concave portion

3

 

 

 

4

6

 

 

1

2

* The shape of the

USB/AC adaptor

 

 

may vary

The supplied USB Cable (small plug)

depending on the

 

 

area where you

purchased.

The supplied 3.5 mm stereo mini plug cable

1 Press and hold the concave portion on the stand and open it upward.

2 Connect the small plug of the supplied USB cable to the USB jack of this unit.

3 Connect the large plug of the USB cable to the USB/AC adaptor.

4En

Image 8
Contents NX-U10 Important Safety Instructions FCC Information for US customers Important Notice do not Modify this UnitContents Controls and Functions FeaturesSupplied Accessories When using USB bus power Put this unit on a flat surface a desk etc. using the standConnections Large plug Mm stereo mini plug cableInstallation of USB drivers Installing on Windows XP, Windows 2000 or Mac OSInstalling on Windows Me Installing on Windows 98SEClick OK Window Copy File When using the USB/AC adaptorCheck the drive name selected above Click OK When using batteries Protrusions BProtrusions a CheckUsing this Unit After using this unitAbout the status indicator LED About the non-skid padTroubleshooting SpecificationsWJ79290