Yamaha Multimedia Speaker, NX-U10 When using batteries, Protrusions B, Protrusions a, Check, Hook

Page 9

3 When using batteries

1

2

 

Concave portion

 

 

 

 

Turn the battery

 

3

 

holder upside-down.

4

Battery holder

 

 

 

Metal plates

Battery holder

Computer, Portable

 

Protrusions B

audio player etc.

 

 

6

Protrusions A

5

 

1With the front protrusions A of the battery holder

being aligned with the protrusions B of the battery

Check

holder tray on the right, snap the battery holder into

 

the battery holder tray by pressing down the near

 

side first.

 

2Press down the far side of the battery holder into place with a click.

3Slide the battery holder to the left. Next, make sure that the battery holder is hooked securely.

Hook

The supplied 3.5 mm stereo mini plug cable

 

English

y

You cannot insert the battery holder into this unit when connecting the USB plug. Unplug the USB cable from this unit before inserting the battery holder.

1 Insert 4 commercially available AAA, R03, UM-4 batteries (alkaline or nickel-hydride batteries) into the battery holder.

Make sure you insert the batteries according to the polarity markings (+ and –).

2 Turn the battery holder upside-down.

3 Press and hold the concave portion on the stand and open it upward.

4 Insert the battery holder into this unit.

5 Connect an audio output jack of your portable audio player and the PORTABLE jack of this unit using the supplied 3.5 mm stereo mini plug cable.

6 Put this unit on a flat surface (a desk etc.) using the stand.

Note

When setting up this unit, do not apply force to the top of this unit. Doing so may cause damage or break the stand.

When removing the battery holder

Push down the hook, and then slide the battery holder rightward to remove the battery holder.

Hook

About batteries

Notes

We recommend using alkaline or nickel-hydride batteries. Manganese batteries provide short battery life.

Do not use an old battery together with a new one.

Do not use different types of batteries (such as alkaline and nickel-hydride batteries) together. Each type of battery has its own characteristics even if they are similar in shape.

When not planning to use this unit for long periods of time (for more than 1 month), remove the batteries from the battery holder.

If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

5En

Image 9
Contents NX-U10 Important Safety Instructions Important Notice do not Modify this Unit FCC Information for US customersContents Features Supplied AccessoriesControls and Functions Put this unit on a flat surface a desk etc. using the stand When using USB bus powerConnections Large plug Mm stereo mini plug cableInstalling on Windows XP, Windows 2000 or Mac OS Installation of USB driversInstalling on Windows Me Installing on Windows 98SEWhen using the USB/AC adaptor Check the drive name selected above Click OKClick OK Window Copy File Protrusions B When using batteriesProtrusions a CheckAfter using this unit Using this UnitAbout the status indicator LED About the non-skid padSpecifications TroubleshootingWJ79290