Philips PCVC740K99 technical specifications Usb, Website

Page 19

USB

You can connect the camera to any USB port on your computer. The computer does not have to be switched off. USB ports are 'hot-swappable', which means that you do not have to restart Windows every time you connect a new USB device. The USB driver will detect the camera as new hardware. It can be used within a few seconds, without the need to restart the computer.

If you unplug the camera while it is actively providing an audio or video stream to an application on your computer, the computer may crash. To avoid these problems, first close any applications using audio from the camera microphone or video from the camera before unplugging the Philips USB PC Camera.

Driver software check

You can determine if the camera is installed correctly, and if it is being recognized by the operating system, by checking the Device Manager menu in System Properties.

1. Access this menu by right-clicking 'My Computer' in the top left-hand corner of the desktop (for Windows®XP: in the Start menu), and clicking Properties. Alternatively, click on Start / Settings / Control Panel, then double-click on System to access the menu (for Windows®XP: Start / Control Panel / System / Hardware).

2. Click on Device Manager to view the list of installed devices.

If the USB PC Camera has been installed correctly and it is plugged into a USB port, you will see the following devices in the list (double-click on the devices to see their specifications):

Imaging Device:

Philips ToUcam <XS, Fun or Pro> Camera; Video

Sound, video and game controllers:

Philips ToUcam <XS, Fun or Pro> Camera; Audio (Microphone)

Universal serial bus controller:

Philips ToUcam <XS, Fun or Pro> Camera; Composite A/V Device

If you unplug the camera from the USB port, these devices will disappear from the list (and can therefore not be used by any application on your computer until you reconnect the USB camera).

WEBSITE

If you have any questions or experience any problems with the camera, please visit our website at www.philips.com/pcstuff for new or updated information.

19

Image 19
Contents Contents Introduction Preparation Contents of the boxGetting started in five easy steps Parts of the camera « How to mount the perchUse of the camera base and the perch Use of the camera pouch Camera and software installation Page Where to get help on the applications Using the applicationsGeneral Image Controls SettingsPerformance Modes Control Full Auto on/offFrame rate Image ControlsWhite Balance Camera ControlsFlickerless DefaultsExposure Performance iconAudio Controls Set preferred recording device Capture SourceUse preferred devices only Capturing images from within applications Twain applicationsCamera source Capture settingsImage formats Auto Image Capture Single Image Capture Voice Controlled snapshotShutter sound Tips Tips and Frequently Asked Questions FAQsImportant Note Website USBWhy cant I choose higher frame rates for the USB Camera? FAQsMy PC will not start when the camera is connected No Video My application doesnt display any video Picture Flicker My video picture is flickering No audio USB timer outside specificationPage Data format Technical specificationsResolution/performance Camera adjustment parametersMinimum system requirements WeightDimensions camera Ambient temperaturePower supply FCC compliance Regulations, Warnings & MaintenanceAVI GlossaryTwain Video stream Video for WindowsWIA