Philips SPC620NC user manual InstallationChapter, Following software license agreement appears

Page 9

InstallationChapter

EN

Or:

Select the second option if you wish to continue installation.

Click ‘Next’ to continue.

>The ‘Installation’ screen appears. The items that can be installed are shown on the left side of the screen.

An explanation of each item is given on the right side.

All required items are selected by default.

5Click the 'Next' button if you wish to install all items.

Or:

If there are certain items you do not wish to install, check the boxes before these items.

Select at least ‘SPC620NC WebCam Driver’ and ‘Philips VLounge’. Click the 'Next' button.

> The following software license agreement appears.

6Click on 'Yes' to continue the installation.

>The following screen appears. 7 Click 'Next' to continue.

> The ’Reboot’ screen appears.

8Select ‘Yes’, then click ‘Finish’ to restart your PC / laptop.

>The V(ideo)-Lounge desktop shortcut ‘‘ will be installed after installation.

>Via VLounge you have access to all camera-related software. See ‘Operating the WebCam’.

9You can now connect your WebCam.

9

Image 9
Contents SPC620NC Page WebCam Philips SPC620NCChapterLegend of functions Safety precautions Copyright ChapterontentsMotion detection Broadcasting your videos over the Internet ENWelcomeChapter ThingsC apteryou should know Safety precautionsCopyright Do not use your WebCam in the waterInstalling the WebCam software ENInstallationChapterInstallation continues automatically Have your Windows CD-ROM at handClick on Yes to continue the installation InstallationChapter’Reboot’ screen appears Following software license agreement appearsConnecting the WebCam to your PC / laptop WebCam will now derive its power from the PC / laptopAim the webcam as required WebCamChapter settings General settingsFlickerless image Video settings ENWebCamChapter settingsFull automatic control on/off Frame rateAuto Exposure Shutter speedUse the slider to set the desired shutter speed. Gain ChapterWebCam settings Brightness enables you to adjust the brightnessBrightness Audio settings Features settings Change background ‘Features’ menu, check the ‘Change background’ boxActual background is static There is sufficient light in the room¡ Add logo Used, when the option is enabledShown in the upper right corner of the screen LogoVLounge OperatingChapter the WebCamSelecting your WebCam Select ‘Video Device’Click the ‘Capture’ tab to open the ‘Capture’ menu Capturing images / making video recordingsFollowing dialogue screen appears Deleting captured itemsClick the ‘OK’ button to delete the selected items Click the ‘Communicate’ tab to open the ‘Communicate’ menuDetection and videolog recording Motion detectionClick the ‘Monitor’ tab to open the ‘Monitor’ menu Click ‘Start monitoring’ to start monitoringClick ‘ ’ to access the ‘Monitor settings’ menu Monitor settingsDeleting videologs Click the ‘OK’ button to delete the selected videologsBroadcast your videos live Broadcasting your videos over the InternetTechnicalChapter specifications ChapterImportant information DisclaimerFCC compliance Important information Disclaimer of warrantyEnvironmental information System requirements