Philips SPC620NC user manual ThingsC apteryou should know, Safety precautions, Copyright

Page 7

ThingsC apteryou should know

EN

Please read the following instructions carefully, and retain them for future reference. It may be helpful to have the instructions for use for the PC at hand for reference.

Safety precautions

Observe the following guidelines to ensure that the WebCam will operate safely and to prevent defects.

Do not use your WebCam in environments outside the following range: temperature: 0°C to 40°C, relative humidity: 45% ~ 85%.

Do not use or store your WebCam in/under:

direct sunlight exposure;

very humid and dusty environment;

near any kind of heat sources.

If your WebCam gets wet, dry it with soft cloth as soon as possible.

If the lens is dirty, Do NOT touch the lens with your fingers.

Clean the outside of the WebCam with a soft cloth.

Do NOT use cleaning fluids based on alcohol, methylated spirit, ammonia, etc.

Do NOT attempt to disassemble or repair your WebCam by yourself. Do not open the WebCam. In the event of technical difficulties return it to your Philips retailer.

Do NOT use your WebCam in the water.

Protect the WebCam from oil, vapour, steam, moisture, and dust.

Never point the WebCam lens at the sun.

Copyright

Copyright © 2003 by Philips Consumer Electronics B.V. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Philips. Brands and product names are trademarks or registered trademarks of their respective companies.

7

Image 7
Contents SPC620NC Page WebCam Philips SPC620NCChapterLegend of functions Chapterontents Safety precautions CopyrightMotion detection Broadcasting your videos over the Internet ENWelcomeChapter Do not use your WebCam in the water Safety precautionsThingsC apteryou should know CopyrightHave your Windows CD-ROM at hand ENInstallationChapterInstalling the WebCam software Installation continues automaticallyFollowing software license agreement appears InstallationChapterClick on Yes to continue the installation ’Reboot’ screen appearsWebCam will now derive its power from the PC / laptop Connecting the WebCam to your PC / laptopAim the webcam as required General settings WebCamChapter settingsFlickerless image Frame rate ENWebCamChapter settingsVideo settings Full automatic control on/offShutter speed Auto ExposureUse the slider to set the desired shutter speed. Gain Brightness enables you to adjust the brightness ChapterWebCam settingsBrightness Audio settings Features settings There is sufficient light in the room ‘Features’ menu, check the ‘Change background’ boxChange background Actual background is staticLogo Used, when the option is enabled¡ Add logo Shown in the upper right corner of the screenSelect ‘Video Device’ OperatingChapter the WebCamVLounge Selecting your WebCamClick the ‘Capture’ tab to open the ‘Capture’ menu Capturing images / making video recordingsClick the ‘Communicate’ tab to open the ‘Communicate’ menu Deleting captured itemsFollowing dialogue screen appears Click the ‘OK’ button to delete the selected itemsClick ‘Start monitoring’ to start monitoring Motion detectionDetection and videolog recording Click the ‘Monitor’ tab to open the ‘Monitor’ menuClick the ‘OK’ button to delete the selected videologs Monitor settingsClick ‘ ’ to access the ‘Monitor settings’ menu Deleting videologsBroadcast your videos live Broadcasting your videos over the InternetTechnicalChapter specifications Disclaimer ChapterImportant informationFCC compliance System requirements Disclaimer of warrantyImportant information Environmental information