Yamaha HTR-5760 owner manual Connecting the antennas, Connecting the AM loop antenna

Page 25

Connecting the antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals.

Indoor FM antenna

AM loop antenna

(included)

 

(included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER

75Ω UNBAL.

AM

FMGND ANT ANT

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

■Connecting the AM loop antenna

1Set up the AM loop antenna, then connect it to the terminals on this unit.

2Press and hold the tab to insert the AM loop antenna

lead wires into the AM ANT and GND terminals.

3Orient the AM loop antenna for the best reception.

CONNECTIONS

Notes

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas.

■75-ohm/300-ohm antenna adapter (U.K. model only)

1Open the cover of the

included 75-ohm/300-ohm antenna adapter.

2Cut the external sleeve

of the 75-ohm coaxial

11 (7/16)

Unit:

8 (5/16)

 

mm (in)

cable and prepare it for 6 (1/14)

connection.

 

 

3 Cut the lead wire and

 

 

remove it.

 

Lead wire

4 Insert the cable

 

 

wire into the slot,

Clamp

Clamp

and clamp it with

 

 

pliers.

 

 

 

Insert the wire

 

 

into slot.

 

5Snap the cover

into place.

PREPARATION

English

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HTR-5760 Important Safety Instructions FCC Information for US customers Serial No For Canadian CustomersContents Built-in 7-channel power amplifier FeaturesSound field features Other featuresInstalling batteries in the remote control Supplied accessoriesGetting Started Please check that you received all of the following partsFront panel Controls and FunctionsInput Mode PRESET/TUNING EditSpeakers A/B Straight EffectRemote control Handling the remote control Using the remote controlSET Menu A/B/C/D/E On ScreenFront panel display LFE indicator 96/24 indicatorInput channel indicators Presence and surround back speaker indicatorsAC Outlets Rear panelSpeaker placement Speaker SetupSpeaker connections Connecting to Presence speaker terminalsBanana plug connections Right Left Subwoofer System Presence speakersFront Right Left Front speakers a Surround back SpeakersCenter terminals Front terminalsSurround terminals Subwoofer jackCable indications ConnectionsAnalog jacks Digital jacksConnections for DVD playback Connecting video componentsA. model Video Monitor For 6-channel input A. model Connecting to the Multi CH Input jacksFor 8-channel input A. model Video AUX jacks on the front panel Connections for other video componentsUse these jacks to connect any video source, such as a Connections for audio components Connecting audio componentsA. model CD player MD recorder or Tape deckConnecting to an external amplifier Connecting the AM loop antenna Connecting the antennas75-ohm/300-ohm antenna adapter U.K. model only Connecting the AC power cord Connecting the power supply cordMemory back-up Impedance Selector switch Impedance Selector switchTurn on the video monitor connected to this unit Turning on the powerFront panel Optimizer microphone setup Auto SetupIntroduction Optimizer microphone positionResultwiring Starting the setupAutomenu Error E-5 ErrorIf an error screen appears ResultexitResultwiring screen appears When you are finished, press SelectIf a warning screen appears Press u / d to select Result LIST, then press SelectBefore auto setup Troubleshooting for auto setup procedureErrors during auto setup Playback Adjust the volume to the desired output levelBasic operations Select the input sourceTo adjust the tone To listen with headphones Silent CinemaSelect a sound field program if desired To mute the soundMulti CH Input Selecting sound field programsSelecting Multi CH Input Front panel operationEnjoying multi-channel software Remote control operationAuto Auto Decoders select with jEnjoying 2-channel software Press q/DTS on the remote control to select the decoderPRO Logic SUR. Standard PRO Logic SUR. EnhancedListening to high fidelity stereo sound Direct Stereo This adjusts the level of compressionNight listening modes Selecting input modes Listening to unprocessed input signalsStraight Downmixing to 2 channelsDisplaying information about the input Information about the input signalSource Press u / d to display the followingAutomatic and manual tuning TuningAutomatic tuning Manual tuning Presetting stationsAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsWhen performing this operation with the remote Selecting preset stationsControl, first press Tuner to set the remote to Repeat steps 1 to 5 to store other stationsSee Selecting preset stations Exchanging preset stationsRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby Digital Dolby DigitalSUR. Enhanced SUR. StandardSUR. Standard PRO Logic PRO LogicConcert Hall For music sourcesJazz Club Rock ConcertSetting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations P08 Movie TheaterPress j / i to adjust the speaker output level Canceling the sleep timerPress Select when you have completed your adjustment Sleep OFFOutputting the test tone from the Presence speakers Using the test tonePress AMP Press Test Sound Menu SET MenuInput Menu Option MenuPress u / d to select Manual Setup Using SET MenuPress Select to enter Manual Setup To exit, press SET Menu when finishedCenter SP Sound Menu 1/2Front SP Surr L/R SPPresence SP Surr B L/R SPLFE/BASS OUT Cross OverCSP Distance 02ASUBWOOFER PhaseSpeaker distance CSP Distance Elfe Level Dcenter GEQFdynamic Range Gaudio SETInput Menu HPR/SB SelectCMPNT-V Input Optical OUTCoaxial Binput ModeOption MENU1/2 Adisplay SETCPARAM. INI Bmemory GuardDzone SET Parameter initialization CPARAM. INIControl area Remote Control FeaturesControlling this unit Controlling other componentsPress Code SET using a ballpoint pen or similar object Setting manufacturer codesTransmit indicator on the remote control flashes twice Input area Category ManufacturerMD/CD Controlling other componentsClearing a setup manufacturer code for component control Clearing setup manufacturer codesEditing Sound Field Parameters What is a sound field Changing parameter settingsElements of a sound field Resetting parameters to the factory presets Sound Field Parameter Descriptions INIT. DLY Initial delayRoom SIZE/P. Room Size Room size SB INIT. DLY Surround back initial delay INIT. DLY Surround initial delayRoom Size Surround room size Liveness Surround livenessREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For 7ch Stereo DIALG.LIFT Dialog liftCT Width Center width For DTS Neo6 Music Image Center imageGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level Or DTS indicator onDolby Digital or DTS Sources cannot beTuner Does not work nor Remote controlFunction properly Be sure this unit is in standby mode Resetting the Factory PresetsFactory Preset appears in the front panel display Press Straight Effect to select the desired settingAudio formats GlossaryAudio information Sound field programsLFE 0.1 channel PCM Linear PCMComponent video signal Video signal informationComposite video signal Video signalSpecifications List of Manufacturer Codes Satellite Tuner Cable TVDBS VCRDVD Recorder DVD PlayerLD Player CD PlayerMD Recorder CD RecorderTape Deck WC85600

HTR-5760 specifications

The Yamaha HTR-5760 is a comprehensive home theater receiver that delivers exceptional audio and video performance, making it an excellent choice for both casual listeners and serious audiophiles. This model combines advanced technology with user-friendly features, ensuring a versatile and immersive home entertainment experience.

One of the standout features of the HTR-5760 is its robust power output, which typically offers up to 100 watts per channel across seven channels. This capability allows the receiver to drive various speaker configurations, ensuring that users can enjoy powerful, clear sound whether they are watching movies or listening to music. The receiver is also equipped with Dolby Digital and DTS decoding, providing support for high-definition sound formats that enhance the overall audio experience.

The HTR-5760 employs Yamaha’s proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This innovative feature automatically analyzes the room's acoustics and adjusts the receiver's settings to achieve optimal sound performance, tailoring the audio output for the best possible experience in any environment.

In terms of video capabilities, the HTR-5760 features onboard support for component video upconversion, allowing users to connect various source devices without the need for multiple cables. This feature provides convenience and reduces clutter when setting up a home theater system. The receiver is also HDMI-compliant, enabling users to connect the latest high-definition devices and enjoy enhanced picture quality across all compatible devices.

Another noteworthy characteristic is the HTR-5760’s multiple inputs and outputs, which include various analog and digital audio connections, video inputs, and even zone capabilities for multi-room audio distribution. It also includes numerous preset sound modes to enhance different types of media, from sports to music and movies.

Furthermore, the Yamaha HTR-5760 boasts a sleek and elegant design that fits seamlessly into any home setup. Its intuitive remote control makes it easy to navigate through the various settings and options available.

In summary, the Yamaha HTR-5760 is a feature-rich receiver that excels in delivering high-quality audio and video, backed by advanced technologies. Whether you are a movie enthusiast or a music lover, this home theater receiver stands out as a solid choice for creating a captivating audio-visual experience at home. Its blend of power, innovation, and user-friendly design ensures it remains relevant in the evolving landscape of home entertainment.
Top Page Image Contents