Yamaha HTR-5760 owner manual Troubleshooting for auto setup procedure, Before auto setup

Page 33

AUTO SETUP

■Troubleshooting for auto setup procedure

Before auto setup

Error message

Cause

Remedy

 

 

 

Connect MIC!

Optimizer microphone is not connected.

• Connect the supplied optimizer microphone to the

 

 

OPTIMIZER MIC jack on the front panel.

 

 

 

Unplug HP!

Headphones are connected.

• Unplug the headphones.

 

 

 

Errors during auto setup

Press SELECT to display detailed information about individual errors. Press j/ ito switch between error messages.

Error message

Cause

Remedy

 

 

 

E-1:NO FRONT SP

Front L/R channel signal(s) is (are) not

• Select the front speakers with SPEAKER A or B.

 

detected.

• Check the front left and right speaker connections.

 

 

 

E-2:NO SURR.SP

A surround channel signal is not detected.

• Check the surround speaker connections.

 

 

 

E-3:NO PRES. SP

A presence channel signal is not detected.

• Check the presence speaker connections.

 

 

 

E-4:SBR->SBL

Only right surround back channel signal is

• Connect the surround back speaker to the LEFT

 

detected.

SURROUND BACK SPEAKERS terminal if you

 

 

only have one surround back speaker.

 

 

 

E-5:NOISY

Background noise is too loud.

• Try the auto setup procedure in a quiet environment.

 

 

• Turn off noisy electric equipment like air conditioners

 

 

(etc.) or move them away from the optimizer

 

 

microphone.

 

 

 

E-6:CHECK SURR.

Surround back speaker(s) is (are) connected,

• Connect surround speakers when you use (a)

 

though surround L/R speakers are not.

surround back speaker(s).

 

 

 

E-7:NO MIC

The optimizer microphone was unplugged

• Do not touch the optimizer microphone during the

 

during the auto setup procedure.

auto setup procedure.

 

 

 

E-8:NO SIGNAL

The optimizer microphone does not detect test

• Check the microphone setting.

 

tones.

• Check the speaker connections and placement.

 

 

 

E-9:USER CANCEL

The auto setup procedure was cancelled due to

• Perform the auto setup procedure again. Do not adjust

 

user activity.

VOLUME (etc.) during the auto setup procedure.

 

 

 

E-10:OTHER ERROR

A DSP communication error or hangup

• Perform the auto setup procedure again.

 

occurred.

 

 

 

 

Warnings after auto setup

Press j/ i to display detailed information about individual warnings.

Warning message

Cause

Remedy

 

 

 

W-1:OUT OF PHASE

Speaker polarity is not correct. This message

• Check the speaker connections for proper polarity

 

may appear depending on the speakers even

(+ or –).

 

when the speakers are connected correctly.

 

 

 

 

W-2:OVER 24m

The distance between the speaker and the

• Bring the speaker closer to the listening position.

(80ft)

listening position is over 24 m (80 ft).

 

 

 

 

 

 

W-3:LEVEL ERROR

The difference of volume level among speakers

• Readjust the speaker installation so that all speakers

 

is excessive. (No level correction is made.)

are set in locations with similar conditions.

 

 

• Check the speaker connections.

 

 

• Use speakers of similar quality and efficiency.

 

 

• Adjust the output volume of the subwoofer.

 

 

 

•If the ERROR or WARNING screens appears, check the cause of the problem, then perform the auto setup procedure again.

•If warning W-1 appears, corrections are made, but they may not be optimal.

•If warning W-2 or W-3 appears, no corrections are made.

•If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.

PREPARATION

English

29

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HTR-5760 Important Safety Instructions FCC Information for US customers Serial No For Canadian CustomersContents Built-in 7-channel power amplifier FeaturesSound field features Other featuresInstalling batteries in the remote control Supplied accessoriesGetting Started Please check that you received all of the following partsFront panel Controls and FunctionsInput Mode PRESET/TUNING EditSpeakers A/B Straight EffectRemote control Handling the remote control Using the remote controlSET Menu A/B/C/D/E On ScreenFront panel display LFE indicator 96/24 indicatorInput channel indicators Presence and surround back speaker indicatorsAC Outlets Rear panelSpeaker placement Speaker SetupConnecting to Presence speaker terminals Speaker connectionsBanana plug connections Right Left Subwoofer System Presence speakersFront Right Left Front speakers a Surround back SpeakersCenter terminals Front terminalsSurround terminals Subwoofer jackCable indications ConnectionsAnalog jacks Digital jacksConnecting video components Connections for DVD playbackA. model Video Monitor Connecting to the Multi CH Input jacks For 6-channel input A. modelFor 8-channel input A. model Connections for other video components Video AUX jacks on the front panelUse these jacks to connect any video source, such as a Connections for audio components Connecting audio componentsA. model CD player MD recorder or Tape deckConnecting to an external amplifier Connecting the antennas Connecting the AM loop antenna75-ohm/300-ohm antenna adapter U.K. model only Connecting the power supply cord Connecting the AC power cordMemory back-up Impedance Selector switch Impedance Selector switchTurning on the power Turn on the video monitor connected to this unitFront panel Optimizer microphone setup Auto SetupIntroduction Optimizer microphone positionStarting the setup ResultwiringAutomenu Error E-5 ErrorIf an error screen appears ResultexitResultwiring screen appears When you are finished, press SelectIf a warning screen appears Press u / d to select Result LIST, then press SelectTroubleshooting for auto setup procedure Before auto setupErrors during auto setup Playback Adjust the volume to the desired output levelBasic operations Select the input sourceTo adjust the tone To listen with headphones Silent CinemaSelect a sound field program if desired To mute the soundMulti CH Input Selecting sound field programsSelecting Multi CH Input Front panel operationEnjoying multi-channel software Remote control operationAuto Auto Decoders select with jEnjoying 2-channel software Press q/DTS on the remote control to select the decoderPRO Logic SUR. Standard PRO Logic SUR. EnhancedThis adjusts the level of compression Listening to high fidelity stereo sound Direct StereoNight listening modes Selecting input modes Listening to unprocessed input signalsStraight Downmixing to 2 channelsDisplaying information about the input Information about the input signalSource Press u / d to display the followingTuning Automatic and manual tuningAutomatic tuning Manual tuning Presetting stationsAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsWhen performing this operation with the remote Selecting preset stationsControl, first press Tuner to set the remote to Repeat steps 1 to 5 to store other stationsSee Selecting preset stations Exchanging preset stationsRecording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby Digital Dolby DigitalSUR. Enhanced SUR. StandardSUR. Standard PRO Logic PRO LogicConcert Hall For music sourcesJazz Club Rock ConcertSetting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations P08 Movie TheaterPress j / i to adjust the speaker output level Canceling the sleep timerPress Select when you have completed your adjustment Sleep OFFUsing the test tone Outputting the test tone from the Presence speakersPress AMP Press Test Sound Menu SET MenuInput Menu Option MenuPress u / d to select Manual Setup Using SET MenuPress Select to enter Manual Setup To exit, press SET Menu when finishedCenter SP Sound Menu 1/2Front SP Surr L/R SPPresence SP Surr B L/R SPLFE/BASS OUT Cross Over02ASUBWOOFER Phase CSP DistanceSpeaker distance CSP Distance Elfe Level Dcenter GEQFdynamic Range Gaudio SETInput Menu HPR/SB SelectCMPNT-V Input Optical OUTCoaxial Binput ModeOption MENU1/2 Adisplay SETCPARAM. INI Bmemory GuardDzone SET Parameter initialization CPARAM. INIControl area Remote Control FeaturesControlling this unit Controlling other componentsPress Code SET using a ballpoint pen or similar object Setting manufacturer codesTransmit indicator on the remote control flashes twice Input area Category ManufacturerMD/CD Controlling other componentsClearing a setup manufacturer code for component control Clearing setup manufacturer codesWhat is a sound field Changing parameter settings Editing Sound Field ParametersElements of a sound field Resetting parameters to the factory presets INIT. DLY Initial delay Sound Field Parameter DescriptionsRoom SIZE/P. Room Size Room size SB INIT. DLY Surround back initial delay INIT. DLY Surround initial delayRoom Size Surround room size Liveness Surround livenessREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level For 7ch Stereo DIALG.LIFT Dialog liftCT Width Center width For DTS Neo6 Music Image Center imageGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level Or DTS indicator onDolby Digital or DTS Sources cannot beTuner Remote control Does not work norFunction properly Be sure this unit is in standby mode Resetting the Factory PresetsFactory Preset appears in the front panel display Press Straight Effect to select the desired settingAudio formats GlossaryAudio information Sound field programsLFE 0.1 channel PCM Linear PCMComponent video signal Video signal informationComposite video signal Video signalSpecifications List of Manufacturer Codes Satellite Tuner Cable TVDBS VCRDVD Recorder DVD PlayerLD Player CD PlayerCD Recorder MD RecorderTape Deck WC85600

HTR-5760 specifications

The Yamaha HTR-5760 is a comprehensive home theater receiver that delivers exceptional audio and video performance, making it an excellent choice for both casual listeners and serious audiophiles. This model combines advanced technology with user-friendly features, ensuring a versatile and immersive home entertainment experience.

One of the standout features of the HTR-5760 is its robust power output, which typically offers up to 100 watts per channel across seven channels. This capability allows the receiver to drive various speaker configurations, ensuring that users can enjoy powerful, clear sound whether they are watching movies or listening to music. The receiver is also equipped with Dolby Digital and DTS decoding, providing support for high-definition sound formats that enhance the overall audio experience.

The HTR-5760 employs Yamaha’s proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This innovative feature automatically analyzes the room's acoustics and adjusts the receiver's settings to achieve optimal sound performance, tailoring the audio output for the best possible experience in any environment.

In terms of video capabilities, the HTR-5760 features onboard support for component video upconversion, allowing users to connect various source devices without the need for multiple cables. This feature provides convenience and reduces clutter when setting up a home theater system. The receiver is also HDMI-compliant, enabling users to connect the latest high-definition devices and enjoy enhanced picture quality across all compatible devices.

Another noteworthy characteristic is the HTR-5760’s multiple inputs and outputs, which include various analog and digital audio connections, video inputs, and even zone capabilities for multi-room audio distribution. It also includes numerous preset sound modes to enhance different types of media, from sports to music and movies.

Furthermore, the Yamaha HTR-5760 boasts a sleek and elegant design that fits seamlessly into any home setup. Its intuitive remote control makes it easy to navigate through the various settings and options available.

In summary, the Yamaha HTR-5760 is a feature-rich receiver that excels in delivering high-quality audio and video, backed by advanced technologies. Whether you are a movie enthusiast or a music lover, this home theater receiver stands out as a solid choice for creating a captivating audio-visual experience at home. Its blend of power, innovation, and user-friendly design ensures it remains relevant in the evolving landscape of home entertainment.
Top Page Image Contents