Sanyo VPC-E1414 instruction manual Setting the Drive Mode, To set the Drive Mode, Sec

Setting the Drive Mode

Your camera features a Self-timer and Burst which can be set in the Drive mode function in the Record Menu. The Self-timer allows you to take images after a pre-defined delay. While burst lets you take consecutive shots. This function is only available in recording still images. The Drive mode setting is automatically set to off when you turn off the camera.

To set the Drive Mode

1.From the Record menu, select Drive Mode.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

The table below shows the available Drive mode settings.

Icon		Item		Description
	Off		Captures an image without time delay.
		10 Sec.		Sets a 10-second delay to capture image after pressing the Shutter button.
	2 Sec.			Sets a 2-second delay to capture image after pressing the Shutter button.
				Performs delay and capture twice:
		Double		• Performs a 10-second delay, then captures the image.
				• Performs another 2-second delay then captures the image again.
	Burst			Performs continuous shooting when the Shutter button is pressed.
				Stops shooting when the shutter button is released.
		Speedy Burst		Captures 30 images in a shot when the Shutter button is pressed.
				Auto set Image size to VGA only.

38