Setting the AEB
AEB stands for Automatic Exposure Bracketing. It permits 3 consecutive images in the order of standard exposure, under exposure and overexposure compensation.
To set AEB
1.From the Record menu, select AEB.
2.Use the 
or 
keys to go through the selection.
3.Press the OK button to save and apply changes.
Setting the AF Area
AF stands for Automatic Focus. This feature determines the area on which the camera focuses.
To set AF Area
1.From the Record menu, select AF Area.
2.Use the 
or 
keys to go through the selection.
3.Press the OK button to save and apply changes.
The table below shows the available AF area settings.
Icon
Item
Description
Wide
The camera automatically selects focus area within the wide frame.
Center
The focus area is fixed on the center.
Setting the AF Lamp
The AF Lamp function allows you to record images even low light conditions.
If AF Lamp is set to Auto, the AF lamp located in the front of the camera, see "Front View" on page 10, emits an red light by half pressing the Shutter button allowing the camera to focus easily.
To set AF Lamp
1.From the Record menu, select AF Lamp.
2.Use the 
or 
keys to go through the selection.
3.Press the OK button to save and apply changes.
39