GE v6 Settings to Reach Host Tab, Alarm Notifier E-mail Support, Phone Numbers to Reach Host

Alarm Notifier E-mail Support:

Enable: Select this check box to activate the e-mail notification option. The following e-mail dialog boxes become available:

•To E-mail Address Field: Select a field name from the drop-down list that will be assigned as an e-mail address. 1) Labels for these field names are assigned on the User Fields and Address Fields tab of this form. 2) The content of each field is entered in the User Fields or Address fields on the Person Form.

[Global Edition: To ensure successful e-mail alarm notification across regions in a Global Edition system, the Global Database Server and all Regional Database Servers must have identical configuration settings. That is: 1) For all Servers in your Global Edition system, the user field selected for the ‘To E-mail Address Field’ must be identical. While configuring each Server, select the field that represents the e-mail address from the drop-down list. 2) All other Alarm Notification information is specific to the Regional Database Server.]

•SMTP E-mail Server: Enter the name of the server that handles the transfer of e-mail to and from the e-mail addresses. This dialog box cannot be left blank and accepts up to 256 alphanumeric characters.

•From E-mail Address: Enter an e-mail address of the account or person that is generating this alarm notification such as spadmin@aol.com. This dialog box cannot be left blank and accepts up to 64 alphanumeric characters.

•Allow Anonymous Access: This check box is selected by default, permitting the transmission of an e-mail alarm notification without further authentication. The E-mail User Name and E-mail Password dialog boxes are not available for entry and not required with default settings.

If the security requirements of the e-mail server require further authentication, clear the check box to make available the dialog boxes for entry of an E-mail User Name and E-mail Password E-mail User Name: Enter the user name that the e-mail server uses to validate this user. This dialog box accepts up to 64 alphanumeric characters.

E-mail Password: Enter the user password that the e-mail server uses to validate this user. This dialog box accepts up to 64 alphanumeric characters.

Save before you exit this form.

Settings to Reach Host Tab

Micro Form

This tab will display ONLY when you are setting up a dial-up, head-of-line micro. Use this tab to configure how the micro dials the host.

Phone Numbers to Reach Host

Enter telephone numbers of up to 20 digits, that the micro dials to reach the host. If an outside line must be accessed in order to dial out, type a comma after the number that accesses the outside line, (typically 9). In this situation, if the telephone number to be dialed is 1-555-666-7777, you would enter the number in this field as follows: 9,15556667777

The micro will dial the number in Number 1: and then try the others in numerical order until connection it made.

All Number fields must contain a telephone number of up to 20 digits. If there is only one telephone number for this micro to reach the host, repeat this number in all fields. (If you click Save after completing the first Number field, the system will automatically complete all Number fields with a duplicate number.)

Dial Interval

Select the interval (none, 1 hour, 8 hours, 12 hours and 24 hours) at which the micro will automatically dial the host. The micro will dial at the bottom of the hour. For example, if you select the 1 hour interval, the micro would dial at 4:30, 5:30 and continue every hour after.

Same Number Retries

Enter the number of times (from 0 to 9) the micro should redial the same telephone number before moving on to the next available telephone number.

Secure Perfect 6.1.1 User Manual 247