GE v6 Mode Tab, Parameter Form Mode Schedule Form, Element Description Select Display Type

Mode Tab

Reference Topics:

Parameter Form Mode Schedule Form

Overview – Micro Utility Form

Manual Control Form

Select all or individual micros or clients for immediate change of mode.

Example: The change of mode for micros is helpful for an immediate "lockdown" or to open all doors immediately. The change of mode for clients applies to alarm routing and bumping.

When you select this tab, a windowpane displays a list of available online micros or client groups in your system, based on facility permissions for the current operator.

Element	Description
Select Display Type	•	Micros: Select to display real time discription, current mode, and address of
		online micros.
	•	Clients: Select to display real time current mode for configured Clients.

Set Mode to

Apply Mode

Purpose

From the drop-down list, select one of the available modes to which you want to change.

•The Current Mode status, as displayed in the list, refreshes automatically following a change of mode (by schedule or manual control).

•Updates for micros display in the Mode column of the Micro Utility Form.

•Updates for clients display on the Client Monitor Form.

Click Apply Mode to send the command to the micro or client. Available modes include Normal, Mode 1, Mode 2, and Mode 3. (Modes are created and labeled on the Mode Labels tab of the Parameter Form.)

Enter the reason for this change of mode. This box accepts 255 characters. This comment is written to the operator history file and displays on the Operator History Report.

Secure Perfect 6.1.1 User Manual 206