GE v6 user manual Micro Configuration Tab, Boards

Micro Configuration Tab

Reference Topics:

Micro/5-PX or Micro/PX-2000 Records Generation

Reader Board Records Generation

DO Board Records Generation

DI Board Records Generation

Micro Form

Use this tab to assign the appropriate boards to this micro.

Before continuing, verify that the micro type (Micro/5-PX, Micro/5-PXN, Micro/PX-2000, or Micro/PXN- 2000) is correct. The boards listed in the Boards column depend on the type of micro you have selected.

Boards

Lists all boards supported by Secure Perfect and the micro type you have selected. To add a board to the current micro record, click and drag to the Configuration column. If the addition of the board violates a micro configuration rule, you will get an error and the board will not be added.

Configuration

Lists the current configuration of the micro. A Power/Comm board is automatically added when you create the micro record. The reader, digital input, and digital output boards will need to be added to match the physical setup of the micro.

Following the addition or deletion of a board, you MUST click Save for the appropriate records to be generated or deleted.

Once you add a board, you are restricted to that type of board only. For example, if you add one 2RP board, any additional boards MUST be 2RP boards. Likewise, you cannot violate any micro configuration rule. These are based on the capacities for each micro. For example, for the Micro/5-PX, you can only add up to four 2RP boards, four 2SRP boards, two 4CRP boards, two 8RP boards, or two CK8RP boards.

Secure Perfect 6.1.1 User Manual 198