HP A3644A, A2969A manual Configure the Operating System and the Adapter, Verm Operation

Configure the Operating System and the Adapter

The HP-HSC Fast/Wide Differential SCSIadapter should au&xonfigure into supported HP-UX systems. When the operating system reboots it will determine your adapter has been installed and will install the correct software device files necessary for the operating system to communicate with peripherals connected to the adapter.

Verm Operation

The only indication of proper operation on the adapter is the green TERM POWER LED located on the adapter bulkhead. If this LED is on, it indicates the adapter is supplying termination power to the SCSIbus.

If the TERM POWER LED is off, refer to the Service Information chapter of this manual for help.

If the TERM POWERLED is on but the SCSIdevice connected to the adapter does not operate properly and you suspect the adapter is malfunctioning, refer to the Service Information chapter of this manual for help.

34InstallationRocedures