HP A2969A, A3644A manual 21

Install the HP A2969A SCSI Adapter in an HP 9000 Series Kxxx

To instaIl the HP A2969A SCSIadapter in an HP 9000Series I&xx computer, perform the following steps:

1.Shut down the operating system and turn power off to the computer. (See page 15.)

2.Wear a grounding wrist strap that is connected to the core I/O or expansion I/O bulkhead.

3.Remove the core I/O or expansion VO from the computer. Refer to the computer system manual for the necessary steps to remove the core I/O or expansion I/O.

4.Grasp the SCSIadapter by its edgesor faceplate. Do not touch electronic components or electrical traces. Recheck the DIP switches on the SCSI adapter for the correct setting.

5.If the SCSIadapter is to be installed in the core I/O, use the slot labeled ‘OPTIONAL I/O (J/8)*‘. If the SCSIadapter is to be installed in the expansion I/O, select an empty slot on the expansion I/O. Seefigure 4 for slot identifications.

InstallationProedures21