7.Before you push the connector on the SCSIcard into the mating connector on the I-EHSC bus converter, turn the captive screws on the HP-HSC bus converter until they engagethe SCSIcard, but do not tighten the screws.

8.Align the connectors, then press them together securely.

9.Tighten the HP-HSCbulkhead screws to secure the SCSIadapter to the HP-HSC I/O bus converter.

10.Re-install the HP-HSCI/O bus converter in the computer system. Refer to the computer system manual for instructions on installing the HP-HSCbus converter.

28 Installation Procedures