Figure 5. Installing the adapter in the I/o bulkhead

8.Press down on the rear of the SCSIadapter until its connector is fully inserted into the receptacle on the core I/O or expansion I/O adapter.

9.Secure the adapter by tightening the two retaining screws (Iocated on the front of the core I/O or expansion YO bulkhead).

10.If the SCSIadapter was installed in the expansion I/O, record the expansion I/O slot number for future reference.

11.Re-install the core I/O or expansion I/O. Refer to the computer system manual for information on re-installing the core I/O or expansion I/O.

Installation Procedures 23

Page 23
Image 23
HP A2969A, A3644A manual Installation Procedures